Bgd36Cfg / Gd36M Finishing; Glass Burner Installation - Napoleon BGD36CFNTR Installation And Operating Instructions Manual

Natural and propane vented gas fireplaces
Table of Contents

Advertisement

9.0 BGD36CFG / GD36M FINISHING

9.1

GLASS BURNER INSTALLATION

CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED
GLASS MEDIA OVER THE BURNER MUST NOT BE MORE THAN ONE LAYER HIGH. MORE THAN ONE LAYER
Evenly spread the glass media onto the media tray, covering the burner tube and following the natural shape of
the media tray.
In some installations, glass media over the burner tube may cause a "Puffi ng" sound. If this sound is
excessive, simply push the media away from the burner ports.
NOTE: The distribution of glass media over the burner tube will infl uence the fl ame height. When the
fl ames impinge on the glass, the glass may discolour slightly and the edges may soften.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild
dish soap, drain, rinse thoroughly and dry before placing over the burner.
Secure the glass ember tray to the burner using 6 screws
(W570-0001).
Spread the clear glass embers (W300-0102) onto the
glass ember tray evenly covering the burner tube (follow
natural shape of tray).
NOTE: The distribution of clear glass embers over
the burner tube will infl uence the fl ame height.
NOTE: When removing the glass ember tray make
sure the glass embers are away from the center of
the screen, exposing the burner, remove screws and
lift glass ember tray out.
When replacing burner, absolutely no glass embers can
be in cup surrounding the orifi ce. HINT: If glass falls
into cup and surrounds the orifi ce, insert a clean bag
into a vacuum cleaner and vacuum out glass embers.
Replacement glass embers can be ordered from Wolf
Steel Ltd.
OVER THE BURNER WILL CAUSE FLAME LIFTING AND SOOTING PROBLEMS.
WARNING
!
THAT IT IS DRY.
DEALER / DISTRIBUTOR.
45
74.1A
MEDIA
TRAY
BURNER
W415-0899 / B / 03.13.12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bgd36cfgnGd36mnBgd36cfgpGd36mpBgd36cfptr

Table of Contents