Using Preset Tuning; Storing Preset Stations - JVC RX-DV31 Instructions Manual

Tuner Operations

Using Preset Tuning

Once a station is assigned to a channel number, the station
can be tuned in quickly. You can preset up to 30 FM and 15
AM stations.

7 Storing preset stations

Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step 2
again.
On the front panel
1
Tune in to the station you want to store (see
"Tuning in to Stations Manually" on page 20).
• If you want to store the FM reception mode for this
station, select the FM reception mode you want. See
"Selecting the FM Reception Mode" on page 22.
ANALOG DIGITAL AUTO PL DSP SLEEP PROGRAM REPEAT
PPCM AUTO SURROUND
GROUP TITLE TRACK CHAP. RESUME
DIGITAL L C R
LPCM SUBWFR LFE
MPEG-2 AAC LS S RS
Ex.: When selecting the FM band
2
Press MEMORY.
The channel number position flashes on the display for
about 5 seconds.
ANALOG DIGITAL AUTO PL DSP SLEEP PROGRAM REPEAT
PPCM AUTO SURROUND
GROUP TITLE TRACK CHAP. RESUME
L C R
DIGITAL
LFE
LPCM SUBWFR
MPEG-2 AAC LS S RS
3
Press CONTROL 3 (or 2) to select a
channel number while the channel number
position is flashing.
PROGRAM
ANALOG DIGITAL AUTO PL DSP SLEEP REPEAT
PPCM AUTO SURROUND
GROUP TITLE TRACK CHAP. RESUME
L C R
DIGITAL
LPCM SUBWFR LFE
MPEG-2 AAC LS S RS
21
1A-B RANDOM PROGRESSIVE RDS TA NEWS INFO INPUT ATT
REC
SPK 1 2
AUTO MODE
B.S.P BONUS TUNED STEREO AUTO MUTING
A.POSITION
kHz
MHz
VOL
1A-B RANDOM PROGRESSIVE RDS TA NEWS INFO INPUT ATT
SPK 1 2 REC
AUTO MODE
B.S.P BONUS TUNED STEREO AUTO MUTING
A.POSITION
kHz
MHz
VOL
1A-B RANDOM PROGRESSIVE RDS TA NEWS INFO INPUT ATT
SPK 1 2 REC
AUTO MODE
B.S.P BONUS TUNED STEREO AUTO MUTING
A.POSITION
kHz
MHz
VOL
4
Press MEMORY again while the selected
channel number is flashing on the display.
The station is assigned to the selected channel number.
• The selected channel number stops flashing and then
the frequency flashes for about 5 seconds.
5
Press CONTROL 3 (or 2) to select another
frequency you want to store while the
frequency is flashing on the display.
6
Repeat steps 2 to 5 until you store all the
stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the
previously stored one.
From the remote control
After tuning in to the station you want to store,
1
Press MEMORY.
The channel number position flashes on the display for
about 5 seconds.
2
Press the number buttons to select a preset channel
number while the channel number position is flashing.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 30, press +10, +10, then 10.
3
Press MEMORY again.
4 Press TUNING 9 or ( to select another frequency you
want to store.
5
Repeat steps 1 to 4 until you store all the stations you
want.