JVC LET0091-001A Instructions Manual page 57

MONITOR TYPE
You can select a monitor type when you playback DVD discs recorded for wide
screen televisions.
If your television has a normal (4:3) screen, select "4:3 PS
the "wide" picture) or "4:3 LB
aspect ratio).
[on DVD disc]
[16:9 wide television screen]
squeezed recording
If your television has a wide (16:9) screen, you have to select "16:9 WIDE".
AV COMPULINK MODE
If you use the AV Compulink system, you must set this item correctly.
Select from the three options: DVD1, DVD2 and DVD3 according to the equipment
to be connected.
See "AV Compulink remote control system" on pages 62.
DIGITAL AUDIO OUTPUT
To connect the player's digital output with an external amplifier or receiver
equipped with a digital input, this item must be set correctly.
PCM ONLY: to connect to a PCM digital input of a piece of audio
equipment.
PCM/AC-3: to connect to a Dolby digital input of a Dolby Digital decoder
or an amplifier with built-in Dolby Digital decoder.
The following chart shows the relationship between kinds of playback discs and
output signals.
Playback discs
DVD with 48-kHz, 16-bit linear PCM
DVD with 48-kHz, 20/24-bit linear PCM
DVD with 96-kHz, linear PCM
DVD with Dolby Digital
DVD with MPEG audio
CD
Video CD
Selecting Preferences
" (with masking bars to maintain the "wide"
[4:3 (normal) television screen]
converted and output
Output
(PCM/AC-3 mode)
48-kHz, 16-bit linear PCM
48-kHz, 20-bit linear PCM
no output
Dolby Digital bitstream
48-kHz, 16-bit linear PCM
44.1-kHz, 16-bit linear PCM
44.1-kHz, 16-bit linear PCM
" (cuts both sides of
letter box conversion
pan scan conversion
Output
(PCM ONLY
mode)
48-kHz,
16-bit
linear
PCM
55