Adjusting The Picture Quality - JVC HR-XVC23U Instructions Manual

VFP function

— Adjusting the picture quality

The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programing,
picture tone or personal preference.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step 1 again.
1
Access the VFP setting menu.
Press DVD PICTURE during
playback.
The current setting appears on
the TV screen.
2
Select the VFP mode.
Press w e repeatedly.
Each time you press w e, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
NORMAL
: Select this normally.
CINEMA
: Suitable for movie.
USER 1
/ You can adjust parameters that affect picture
USER 2
: appearance and store settings. Go to step 3.
NOTE:
You cannot adjust the parameters of "NORMAL" and "CINEMA".
To adjust picture appearance manually
3
Access USER menu.
Press w e repeatedly to
select "USER 1" or "USER 2".
4
Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
Adjust gradually and confirm picture appearance results are as
preferred.
GAMMA
(–3 to +3):
BRIGHTNESS
(–8 to +8):
CONTRAST
(–7 to +7):
SATURATION
(–7 to +7):
TINT
(–7 to +7):
SHARPNESS
NORMAL
0
GAMMA
(–8 to +8):
BRIGHTNESS 0
0
CONTRAST
0
SATURATION
VFP menu disappears and the following pop-up window
TINT 0
+3 appears on the TV screen.
SHARPNESS
The selection menu disappears automatically if you do not
change the selection for 10 seconds.
5
Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
The current VFP settings appear again.
6
Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
To activate your setting
Press DVD PICTURE, then press w e repeatedly to select
"USER 1" or "USER 2" that you have changed the
USER 1
GAMMA 0
parameters.
0
BRIGHTNESS
0
CONTRAST
0
SATURATION
0
TINT
+3
SHARPNESS
Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
Controls screen brightness.
Controls screen contrast.
Controls screen color depth.
Controls screen tint.
Controls screen sharpness.
GAMMA
GAMMA 0
47
EN
0