Left-Hand Stalk Switch - Volvo C70 Owner's Manual

Stalk switch positions
Direction indicators - short flash sequence
Direction indicators - continuous flash
sequence
Main beam flash
Home safe lighting and switching between
main and dipped beam.
1 Factory settings.
Direction indicators
Short flash sequence
Move the stalk switch up or down to
position (1) and release.
> The direction indicators flash 3 times
and the stalk switch returns to its origi-
nal position.
Continuous flash sequence
Move the stalk switch up or down to
end position (2).
> The stalk switch remains in its end posi-
tion and is moved back manually, or
automatically by steering wheel move-
ment.
Main beam flash
Move the stalk switch gently towards the
steering wheel to position (3).
> Main beam comes on until the stalk
switch is released.
Main beam flash only works when the remote
control key is inserted into the ignition switch.
02 Instruments and controls

Left-hand stalk switch

Switching between main and dipped
beam
Move the stalk switch to the end position
(4) and release.
The remote control key must be in position II
and the headlamp control in end position, see
page 57, for main beam to be switched on.
Home safe lighting
Some of the exterior lighting can be kept
switched on to work as home safe lighting after
the car has been locked. The standard delay is
1
30 seconds, but can be changed to 60 or 90
seconds, see page 78.
1. Remove the remote control key from the
ignition switch.
2. Move the stalk switch towards the steering
wheel to position (3) and release.
3. Get out of the car and lock the door.
02
``
61