Left-Hand Stalk Switch - Volvo XC60 Twin Engine Quick Manual

03

LEFT-HAND STALK SWITCH

Headlamp functions are controlled using the left-hand stalk switch.
If you select AUTO mode, the car detects when it is dark/light and the
lighting is set accordingly, e.g. when evening falls or when you drive into
a tunnel. You can also turn the stalk switch's thumbwheel to
main beam, which is dimmed automatically for oncoming traffic. Manual
main beam is activated by moving the stalk switch away from you.
Deactivate by moving the stalk switch towards you.
Active bending lights* are designed to provide maximum lighting in
bends and at junctions by means of the light following steering wheel
movements. The function is activated automatically when the car is
started and can be deactivated in the centre display's function view.
Approach lighting switches on the outside lighting when you unlock
the car with the key, and helps you to reach the car safely in the dark.
Home safe lighting switches on some of the exterior lighting after you
have locked the car in order to provide illumination in the dark. Activate
the function by switching off the car, and then move the left-hand stalk
switch towards the instrument panel and release. The time for how long
the home safe lighting should remain switched on can be set via the
centre display.
Resetting the trip meter
Reset all information in the manual trip meter (TM) with a long press on
the RESET button. A short press only resets the mileage. Trip meter,
automatic (TA), is reset automatically when the car has not been used
for 4 hours.
for