Timer Setting - JVC CA-MXDVA9 Instructions Manual

5
Turn 4 / ¢ to select the source to play,
then press SET.
• The source changes as follows:
TUNER FM
AUX TAPE
TUNER FM: tunes into a specified preset FM station.
= Go to step 6.
TUNER AM: tunes into a specified preset AM station.
= Go to step 6.
DISC– – –: plays a disc from a specified title or track
of a specified disc. = Go to step 6.
TAPE: plays a tape in deck A or B.
= Go to step 7.
plays an external source. = Go to step 7.
AUX:
6
When selecting "TUNER FM" or "TUNER
AM"
Turn 4 / ¢ to select the preset station number, then
press SET.
The unit enters volume setting mode.
When selecting "DISC– – –"
1) Turn 4 / ¢ to select the disc number, then press
SET.
2) Turn 4 / ¢ to set the title or track number, then
press SET.
The unit enters volume setting mode.
7
Turn 4 / ¢ to set the
volume level.
• The volume level changes as
follows:
VOL – – VOL 05
VOL 15 VOL 10
• If you select " VOL – –," the volume is set to the last
level when the unit has been turned off.
8
Press SET to complete the Daily

Timer setting.

The DAILY (Daily Timer) indicator stops
flashing and remains lit. The settings you
have done are shown on the display in
sequence.
TUNER AM
DISC– – –
– 45 –
9
Press STANDBY/ON
turn off the unit (on standby)
if you have set the Daily Timer
with the unit turned on.
If the unit is turned on when the on-time comes
Daily Timer does not work.
Even if you unplug the AC power cord or if a power
failure occurs
Once you set the timer, the timer setting may remain stored in
memory for a few days. In this case, check whether the timer setting
still remains or not.
To turn off or on Daily Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until
"DAILY" appears on the display.
2 To turn off the Daily Timer, press
CANCEL/DEMO.
indicator and the DAILY (Daily
Timer) indicator go off from the display
("OFF" appears for a while).
The Daily Timer is canceled, but the
setting for the Daily Timer remains in
memory.
To turn on the Daily Timer, press SET.
indicator and the DAILY (Daily Timer)
indicator light up on the display. The settings
you have done are shown on the display in
sequence for your confirmation.
STANDBY/ON
to
STANDBY