Playing Back Discs-Introduction - JVC CA-MXDVA9 Instructions Manual

Playing Back Discs—Introduction
Discs you can play
This unit has been designed to play back discs having the
marks listed below.
Disc Mark
Type (Logo)
DVD
VIDEO
Video
CD
S-Video
CD
Audio
COMPACT
CD
DIGITAL AUDIO
CD-R**
CD-RW**
• On some discs, their actual operations may be different
from what is explained in this manual.
• The following discs cannot be played back;
DVD-AUDIO, DVD-ROM, DVD-RAM, DVD-R,
DVD-RW, CD-ROM, CD-I (CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage
the speakers.
• Continued use of irregular shape discs (heart-shape,
octagonal, etc.) can damage the unit.
* Note on Region Code
DVD players and DVD Video discs have their own Region
Code numbers. Confirm the Region Code shown on the rear
of the unit.
Ex.:
Video Region Code
Format Number*
2, 3, 4
or
ALL
NTSC
PAL
** Note on CD-R and CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
Rewritable) can be played back only if they are already
"finalized."
• You can play back your original CD-Rs or CD-RWs
recorded in music CD format. (However, they may not be
played back depending on their characteristics or
recording conditions.)
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or if the player's lens is dirty.
• CD-RWs may require a longer readout time. This is
caused by the fact that the reflectance of CD-RWs is
lower than for regular CDs.
IMPORTANT:
Before performing any operations for DVD, SVCD and
VCD, make sure of the following.
• Check the connection with the TV.
• Turn on the TV and select the correct input on the TV to
view the pictures or on-screen menus/indications on the TV
screen.
• Select the correct color system.
If " " appears on the screen when pressing a button,
the disc cannot accept an operation you have tried to do.
– 16 –
Continued