How To Mount - JVC WB-S681U Instructions Manual

WB-S685U Ceiling Recessed Bracket
Notes on Installation
● Check that the installation location is able to withstand the total weight of the camera, which is about 2.9 kg, before
you install. If the location is not strong enough, reinforce with a reinforcing board.
● The unit can be installed on ceilings of thickness up to 35 mm.
● Always use anchor bolts to secure WB-S685U. If anchor bolts are unavailable, be sure to use wire rope.
● Conform to the local standards during the installation or construction.

How to mount

Rotate the fixing screws (x3)
in anticlockwise direction,
shift the clamping brackets
upwards as shown on the
right diagram.
1.
Make a hole in the
ceiling.
Use the provided template.
2.
Use a stopper to
temporarily secure
WB-S685U on the ceiling.
3.
Use anchor bolts to
secure WB-S685U on
the ceiling.
4.
Use the clamping
brackets (x3) to
secure on the ceiling.
Rotate the fixing screws (x3)
in clockwise direction.
CAUTION
Make sure the clamping brackets are
securely fastened.
Making a hole in
the ceiling
1.
Stopper
2.
Anchor bolt
Anchor bolt hole
(3/8 inch)
Clamping
brackets
4.
Fixing screws
Rotate in
clockwise direction
Screw driver
(Not for USA and Canada)
Screw driver
200 mm
3.
Hexagon nut
Clamping brackets
When anchor bolts cannot be used
CAUTION
Take note of the length, strength,
pull and material of the wire rope
to be used.
Clamping
brackets
Fixing
screws
Rotate in
anticlockwise
direction
Ceiling
5 mm~35 mm
Front side of camera
<Top View>
To reinforcing
anchor
Wire rope