JVC WB-S681U Instructions Manual page 10

WB-S685U Ceiling Recessed Bracket
5.
Connect the cable.
Connect the cable to the
terminal block of the
ceiling attachment fitting.
6.
Mount the ceiling
attachment fitting on
WB-S685U.
(3 locations)
CAUTION
Ensure that the cable is not caught in
between during installation.
7.
Install the fall
prevention wire.
8.
Mount the camera to the
ceiling attachment fitting.
(For details, refer to the Instruction
Manual of the camera.)
CAUTION
Before installing, configure the settings
of the camera to be used.
The camera's fixed-lock knobs cannot
be locked.
When mounting the camera, make
sure the camera's fixed-lock knobs
(2 locations) are protruded and that
a click sound is heard.
After installation, check that the
camera is securely installed using a
penlight. The camera may fall off if
the installation is not properly done.
9.
Install the ceiling panel.
Place and mount the ceiling panel
(accessory) on the hooks (x2)
of WB-S685U.
CAUTION
Do not damage the dome cover when
installing the ceiling panel.
Front side of camera
Cable
6.
Screws (M4)
(Accessory)
(Not for USA and Canada)
5.
8.
9.
Ceiling panel
Dome cover
(continued)
7.
Fall prevention wire
of the camera
CAUTION
Ensure that the fall prevention
wire is secured at the
positions shown above.
Ceiling
attachment fitting
Fall prevention wire
Check the fixed-lock knob
position
Improper
installation
Perfect
installation
Hook