Lighting: Setting The Brightness; Lighting: Setting The Switch-Off Time - Miele CVA 5065 Operating And Installation Instructions

Built-in coffee machine for connection to mains water supply
Table of Contents

Advertisement

Settings: Customising your machine
Lighting: Setting the
brightness
You can set how bright the lighting
should be on the machine:
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Lighting
Info
^ Touch the right arrow sensor until
"Lighting" is highlighted, and then
touch the OK sensor.
^ Select "Brightness", and then touch
the OK sensor.
^ Touch one of the arrow sensors to
select a lighter or darker setting, and
then touch the OK sensor.
To switch off the lighting,
^ touch the left arrow sensor until the
small white bars are no longer visible.
Lighting: Setting the switch-off
time
The machine lights up when switched
on. It switches off automatically after 15
minutes of inactivity to save energy.
The lighting can be set to remain on for
a specific length of time after the
machine is switched off, and then to go
out automatically after a specified time
if the machine is not used.
This duration can be set to between 15
minutes and 6 hours:
^ Switch the machine off.
^ Touch the OK sensor whilst the
machine is off.
34
^ Select "Lighting" and touch the OK
sensor.
^ Select "Switch off after" and touch the
OK sensor.
^ Select the switch-off time you want
with the arrow sensors and touch the
OK sensor.
^ Select "Brightness", and touch the OK
sensor.
^ Touch one of the arrow sensors to
select a lighter or darker setting, and
then touch the OK sensor to save the
setting (factory default setting: Off).
^ Touch "Back A" twice to leave the
menu.
The lighting will switch off automatically
after the duration set.
If you do not want the lighting to remain
on after switching off the coffee
machine (Factory default):
^ Touch the OK sensor whilst the
machine is off.
^ Select "Lighting", and then touch the
OK sensor.
^ Select "Brightness" and touch the OK
sensor.
^ Touch the left arrow sensor until the
small white bars are no longer visible.
^ Touch "Back A" twice to leave the
menu.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents