Technical Safety - Miele CVA 5065 Operating And Installation Instructions

Built-in coffee machine for connection to mains water supply
Table of Contents

Advertisement

Technical safety

~
Before setting up the machine,
check it for any externally visible
damage. Never install or attempt to use
a damaged machine. Danger of injury.
~
To avoid the risk of damage to the
machine, make sure that the rating on
the data plate corresponds to the
voltage and frequency of the household
supply, before connecting the machine
to the mains supply. Consult a qualified
electrician if in any doubt.
~
The electrical safety of this machine
can only be guaranteed when
continuity is complete between it and
an effective earthing system which
complies with local and national safety
regulations. It is most important that this
basic safety requirement is present and
tested regularly, and where there is any
doubt the household wiring system
should be inspected by a qualified
electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
~
The machine must only be operated
when built in, to ensure that all
electrical components are shielded.
Ensure power is not supplied to the
machine until after installation, repair
work or maintenance work has been
carried out.
~
Do not connect the machine to the
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the machine (e.g. danger of
overheating).
Warning and Safety instructions
~
If the coffee machine is installed
behind a furniture door, it must not be
used with the door closed.
Never close the furniture door when the
machine is in use.
~
This appliance must not be installed
and operated in mobile installations
(e.g. on a ship).
~
The machine must only be
connected to a cold water supply.
Connecting it to a hot water supply
would cause damage.
~
The tap must be accessible for
servicing work after the coffee machine
has been built-in.
~
The protective sleeve of the water
inlet hose must not be damaged or
become kinked. This will cause it to
leak.
~
The integrated Waterproof System
offers protection from water damage,
provided the following conditions are
met:
– The machine is correctly installed
and plumbed in.
– The machine is properly maintained
and parts are replaced where it can
be seen that this is necessary.
– The tap is turned off when the
machine is not used for a longer
period of time (e.g. during holidays).
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents