The Xendesktop Tab - NComputing N400 User Manual

2.1 The XenDesktop Tab

The XenDesktop tab is used to point your N-series device to your XenDesktop Services Site as well as
configure certain application behaviors.

Auto-configure (DHCP)* –
Site information automatically via DHCP (requires that you configure your DHCP server to
distribute this information).

Name/URL –
Domain Name of your XenDesktop Services Site.

Use Citrix Access Gateway –
access your Citrix environment securely from outside your network via the Citrix Access
Gateway.

Auto-launch if only one application is published
environment is configured to only publish a single application to the user session obtained by a
given device, you can use this feature to automatically launch that application on login.

Auto-logoff on last application quit
device to automatically log out if all applications are closed.
*Note:
You can configure your DHCP server to automatically provide your N-series device(s) with
XenDesktop server information. This eliminates the need for you to manually configure this setting for
each device. Review section
information.
Page 11 of 25
Instructs the N-series device to obtain XenDesktop Services
Use this field if you wish to manually enter the IP, URL, or Fully Qualified
Enabling this feature will allow your N-series device to
4.2 DHCP Options for Automatic N-series Configuration
NComputing N-series User Manual rev11.09.12
– If your XenDesktop
– Enabling this feature will cause your N-series
for more