Preparing The Paper Cassette - Canon Selphy CP820 User Manual

Preparing the Paper Cassette

1
Check the paper size.
z z
Check the size on the paper cassette
(such as "Postcard" or "Card Size") to
make sure it matches the size of the ink
cassette.
2
Open both covers.
z z
There are two layers of covers. First open
the outer cover ( ), and then the inner
cover ( ).
3
Load the paper.
z z Load the paper in the paper cassette.
z z
The paper cassette holds up to 18
Glossy
sheets. Loading 19 or more sheets may
side
damage the printer or cause malfunction.
z z Holding the paper as shown, load it with
the glossy side up. (Do not touch the
glossy side of the paper, which may affect
print quality.)
z z
Remove any protective sheets from
the paper, and load only paper into the
cassette.
z z
When making postcard prints with space
for a stamp, load the paper with the
stamp area facing as shown.
4
Close the inner cover.
z z Close the inner cover firmly until it clicks
into place. Leave the outer cover open
when printing.
Printing on L-Size Paper
z z You can use Paper Cassette PCPL-
CP400 (sold separately) to print on L-size
paper.
z z
To print on postcard paper, remove the
adapter as shown.
• Use only paper in a genuine Canon Color Ink / Paper Set for
SELPHY CP printers. Other paper, such as regular postcards or
paper for SELPHY ES printers, cannot be used.
•
Never do the following, which may damage the printer or cause
malfunction.
Loading paper upside-down, with the glossy
-
and back sides reversed
- Bending or separating paper at the
perforations before printing
Using label paper whose upper label surface
-
is peeling off or has been partially pulled up
- Writing on paper before printing
- Reusing paper, as by printing on blank areas
(= 4)
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB
Cable
Troubleshooting
Appendix
Springs
9