Specifications - Extron electronics MTP 15HD A Series User Manual

Reference Information

Specifications

Video
Gain ................................................ Unity
Number/signal type .................... 1 set of proprietary analog signals
Connectors .................................... 1 female RJ-45
Video input and loop through — transmitters
Number/signal type .................... 1 analog RGBHV, RGBS, RGsB, RsGsBs,
Connectors .................................... 2 female 15-pin HD
Nominal level ............................... 1 Vp-p for Y of component video and
Minimum/maximum levels ....... 0.3 V to 1.45 Vp-p
Impedance ..................................... 75 ohms
Horizontal frequency ................... 15 kHz to 130 kHz
Vertical frequency ......................... 30 Hz to 150 Hz
Return loss ..................................... <-30 dB @ 5 MHz
DC offset (max. allowable) .......... 250 mV
Video output — receivers
Number/signal type .................... 1 set of proprietary analog signals
Connectors .................................... 1 female RJ-45
Nominal level ............................... 1 Vp-p for Y of component video and
Minimum/maximum levels ....... 0.3 V to 1.45 Vp-p
Impedance ..................................... 75 ohms
Return loss ..................................... <-30 dB @ 5 MHz
DC offset (max. allowable) .......... ±35 mV with input at 0 offset
MTP 15HD A Series • Reference Information
23
component video, S-video, or composite
video
1 buffered RGBHV, RGBS, RGsB, RsGsBs
local monitor loop through (includes
ID bits)
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
0.3 Vp-p for C of S-video
1 analog RGBHV, RGBS, RGsB, RsGsBs,
component video, S-video, or composite
video
1 female 15-pin HD
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
0.3 Vp-p for C of S-video