Extron electronics MTP 15HD A Series User Manual
  1. Manuals
  2. Brands
  3. Extron electronics Manuals
  4. Receiver
  5. MTP 15HD A Series
  6. User manual

Extron electronics MTP 15HD A Series User Manual

High resolution video and audio mtp transmitters and receivers
Hide thumbs Also See for MTP 15HD A Series:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
MTP 15HD A Series
High Resolution Video and Audio
MTP Transmitters and Receivers
68-956-02 Rev. E
12 09

Advertisement

Table of Contents
loading

Related Manuals for Extron electronics MTP 15HD A Series

Summary of Contents for Extron electronics MTP 15HD A Series

  • Page 1 User’s Manual MTP 15HD A Series High Resolution Video and Audio MTP Transmitters and Receivers 68-956-02 Rev. E 12 09...
  • Page 2 Precautions Safety Instructions • English Warning Power sources • This equipment should be operated only from the power source This symbol is intended to alert the user of important indicated on the product. This equipment is intended to be used with a main power operating and maintenance (servicing) instructions in system with a grounded (neutral) conductor.
  • Page 3 安全须知 • 中文 警告 电源 • 该 设 备 只 能 使 用 产 品 上 标 明 的 电 源 。 设 备 这个符号提示用户该设备用户手册中 必 须 使 用 有 地 线 的 供 电 系 统 供 电 。 第 三 条 线 有重要的操作和维护说明。...

  • Page 4: Table Of Contents

    MTP transmitter and receivers for non-CAT 7 cable ..... 26 MTP transmitter and receivers for CAT 7 cable ......26 Included parts .................. 26 Accessories ..................26 Cables/connectors ................27 All trademarks mentioned in this manual are the properties of their respective owners. 68-956-02 Rev. E 12 09 MTP 15HD A Series • Table of Contents...

  • Page 5: About This Manual

    MTP RL 15HD A SEQ receivers are a system for long-distance distribution of VGA or other high resolution video and audio. The MTPs are a part of the Extron compact line of basic distribution amplifiers, switchers, transmitters and receivers, and associated video accessories. MTP 15HD A Series • Introduction...
  • Page 6 RGB video, component video, and S-video transmission. An SEQ receiver should not be necessary when Extron Enhanced Skew-Free A/V UTP cable is used. Each MTP transmitter and receiver model is shipped with an external desktop 12 V power supply that accepts 100 VAC to 240 VAC, 50-60 Hz input. MTP 15HD A Series • Introduction...

  • Page 7: Twisted Pair (Tp) Cable Advantages

    DTP26 cable, or CAT 5, 5e, 6, or 7 cable, terminated with RJ-45 connectors. The non-C7 transmitter and receiver are designed for and perform best with Extron Enhanced Skew-Free A/V cable terminated in accordance with the TIA/EIA T 568 A wiring standard. CAT 5, 5e, and 6 cables are acceptable for the non-C7 models, but less preferable. We also recommend the use of preterminated and tested cables. Cables terminated on site should be tested before use to ensure that they comply with Category 5 specifications. The use of DTP26 or CAT 7 cable with non-C7 products has a negative effect on transmission distance. DTP26 or CAT 7 cable should only be used with C7 products. The recommendations shown in the table on page 4 apply for a single transmitter and receiver and for a daisy chain. For example, the maximum suggested range for 1024 x 768 video is 300 feet (90 m) with the Pre-Peak switch off and 500 feet (150 m) with the Pre-Peak switch on, whether the system consists of one transmitter and one receiver or a transmitter and three daisy-chained receivers. For daisy-chained units, the first receiver in the chain must be at least 100 feet (30 m) from the transmitter when the Pre-Peak switch is on. For daisy-chained units, any receiver in the chain closer than 350 feet (105 m) may experience some form of over- peaking when the Pre-Peak switch is on. An overpeaked image may appear bloomed. MTP 15HD A Series • Introduction...
  • Page 8 <250' >300' 300' 400' HDTV 1080i (75 m) (90 m) (90 m) (120 m) <250' >300' 300' 400' HDTV 1080p (75 m) (90 m) (90 m) (120 m) Resolutions marked with an asterisk (*) in the table above have the same range specifications at 75 Hz. It is possible to exceed the recommended distance; however, image quality may be reduced. Extron recommends using at least 25 feet of TP cable between the transmitter and the first receiver. MTP 15HD A Series • Introduction...

  • Page 9: Installation

    5. Reliable earthing (grounding) — Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections (such as the use of power strips) other than direct connections to the branch circuit. MTP 15HD A Series • Installation and Operation...

  • Page 10: Rack Mounting Instructions

    (part number 60-604-02) Basic Rack Shelf Quarter Rack Width False Faceplate Use 2 mounting holes on opposite corners. (2) 4-40 x 3/16" Screws Figure 1 — Mounting the MTP on a 3.5" rack shelf MTP 15HD A Series • Installation and Operation...
  • Page 11 4. Insert the shelf into the rack, aligning the holes in the shelf with those of the rack. 5. Secure the shelf to the rack using the supplied machine screws (see figure 2). MTP 15HD A Series • Installation and Operation...

  • Page 12: Back Of The Rack Mounting Instructions

    3. Attach one bracket to the side of the unit using the longer screws included in the kit. 4. Repeat steps 2 and 3 on the other side of the unit. MTP 15HD A Series • Installation and Operation...

  • Page 13: Furniture Or Projector Mounting

    MTP under furniture or to a projector mount (see figure 5). • MBU 123 Low-Profile Mount Kit, part number 70-212-01 • PMK 100 1/4 Rack Width Pole Mount Kit, part number 70-217-01 MTP 15HD A Series • Installation and Operation...
  • Page 14 Mounting PMK 100 Bolt MBU 123 Projector Under-Desk Mounting Mounting Bracket Bracket Projector Figure 5 — Desk and projector mounting the MTPs MTP 15HD A Series • Installation and Operation...

  • Page 15: Connections And Settings

    Input only sync signals, no video signals, on the sync pins (13 and 14). For component video, use the R (R-Y) and R return pins (pins 1 and 6), G (Y) and G return pins (pins 2 and 7), and B (B-Y) and B return pins (pins 3 and 8). For S-video, use the R, R return (C-chroma), G, and G return (Y-luma) pins. For composite video, use the G pin and the associated return pin. For additional genlocked video signals, use the R, B, and associated return pins. Monitor connector — Connect a video monitor to this 15-pin HD connector for buffered, high resolution video loop-through. MTP 15HD A Series • Installation and Operation...

  • Page 16: Twisted Pair Connection And Settings

    Connect the free end of the same TP cable to the RJ-45 female connector on the receiver. See “TP cable termination” on page 17 to wire the RJ-45 connectors. MTP 15HD A Series • Installation and Operation...

  • Page 17: Receiver

    Connect the free end of the same TP cable from the receiver to the Input RJ-45 female connector on another receiver. “TP cable termination” on page 17 to wire the RJ-45 connectors. The buffered output on the RL receiver does not provide pre-peaking control. The total recommended distance for an entire daisy chain is the same as for a single transmitter and receiver. The Pre-Peak switch has the same effect on the recommended transmission distance for a daisy chain as for a single transmitter and receiver. Up to eight receivers can be connected in series using Buffered Output connectors, provided that the total distance from the TP output of the transmitter to the last receiver in the chain does not exceed the recommended distance for the resolution being used. MTP 15HD A Series • Installation and Operation...

  • Page 18: Video And Audio Connections And Settings

    DO NOT connect the sleeve(s) to the negative (-) contacts. Figure 9 — Captive screw audio connector wiring The length of the exposed (stripped) portion of the copper wires is important. The ideal length is 3/16 inches (5 mm). Longer bare wires can short together. Shorter bare wires are not as secure in the direct insertion connectors and could be pulled out. MTP 15HD A Series • Installation and Operation...
  • Page 19 RGBHV, RsGsBs, or RGBS video. See the table above. Video switch — Set this switch up for RsGsBs, RGsB, component/S-video/composite video or down to output RGBHV or RGBS video. See the table above. Set the Composite Sync, SOG, and Video DIP switches as shown in the table above for the various input and output video formats. MTP 15HD A Series • Installation and Operation...

  • Page 20: Power Supply Wiring

    To verify the polarity before connection, plug in the power supply with no load and check the output with a voltmeter. The two power cord wires must be kept separate while the power supply is plugged in. Remove power before wiring. The length of the exposed (stripped) copper wires is important. The ideal length is 3/16 inches (5 mm). Longer bare wires can short together. Shorter wires are not as secure in the direct insertion connectors and could be pulled out. MTP 15HD A Series • Installation and Operation...

  • Page 21: Tp Cable Termination

    TIA/EIA T568A or TIA/EIA T568B wiring standards. You can use either standard with CAT 5, 5e, 6, 7, and DTP26 cable, but ensure that you use the same standard on both ends of the cable. MTP 15HD A Series • Installation and Operation...
  • Page 22 RJ-45 Connector Figure 11 — TP cable termination For proper grounding of DTP26 and CAT 7 cable only, ensure the shield around each wire pair and the shield around the DTP26 or CAT 7 cable are all tied to the RJ-45 connectors on both ends, in accordance with the connector manufacturer specifications. The audio data that is carried on wire pair 3 and 6 is incompatible with the Extron TPX 88 A, which cannot switch the audio, output it locally, or break it away. Extron Enhanced Skew-Free A/V cable is not recommended for Ethernet/LAN applications. This cable is specially designed for compatibility with Extron Twisted Pair products that are wired using the TIA/EIA T568A standard. The green, brown, and blue wire pairs of this cable have virtually identical lengths and should be used to transmit the RGB signals. The orange wire pair of this cable has a different length and should not be used to transmit the RGB signals. MTP 15HD A Series • Installation and Operation...

  • Page 23: Front Panel Controls And Indicators

    Level control — The Level control alters the video output voltage to affect the brightness of the displayed image. Adjust the knob while viewing the displayed image to set the level/boost that provides the best picture quality. For best results when using an RL receiver, connect a load to the buffered output on the receiver before adjusting the level. MTP 15HD A Series • Installation and Operation...
  • Page 24 62 nanoseconds. The delay is applied in incremental, 2-nanosecond steps. Rotate the control counterclockwise to reduce the delay or clockwise to increase the delay. The control turns smoothly; it does not have mechanical steps or high-and low-limit stops. Watch the displayed image to observe the steps of delay. The selected Red, Green, or Blue LED ( ) flashes to indicate that the control has reached the minimum (counterclockwise rotation) or maximum (clockwise rotation) limit. MTP 15HD A Series • Installation and Operation...

  • Page 25: Skew Delay Compensation

    Use a small screwdriver to press the Select button one more time to save the most recent adjustment or allow the 10-second timeout to elapse. 4. If the remaining colors are left shifted, repeat steps 2 and 3. MTP 15HD A Series • Installation and Operation...

  • Page 26: Non-Seq Receiver Skew Compensation

    • Add a skew compensation cable equal to the length of pair skew to the output of the receiver. • Install a SEQ 100 15HD Skew Equalizer to the video output of the receiver and adjust the skew for the leading video image. MTP 15HD A Series • Installation and Operation...

  • Page 27: Specifications

    0.3 Vp-p for C of S-video Minimum/maximum levels ..0.3 V to 1.45 Vp-p Impedance ........75 ohms Return loss ........<-30 dB @ 5 MHz DC offset (max. allowable) ..±35 mV with input at 0 offset MTP 15HD A Series • Reference Information...
  • Page 28 Nominal level ....... +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) Maximum level C7 models ......±12 dBu, (unbalanced) at 1% THD+N All other models ....+18 dBu, (unbalanced) at 1% THD+N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu MTP 15HD A Series • Reference Information...
  • Page 29 (International Safe Transit Association) Regulatory compliance Safety ........CE, c-UL, UL EMI/EMC ......CE, C-tick, FCC Class A, ICES, VCCI MTBF ..........30,000 hours Warranty ........3 years parts and labor All nominal levels are at ±10%. Specifications are subject to change without notice. MTP 15HD A Series • Reference Information...

  • Page 30: Part Numbers

    RSB 123 3.5" Deep Basic Rack Shelf 60-604-21 70-367-01 MBB 100 1/8 and 1/4 Back of Rack Mounting Kit MBU 123 Low-profile Mount Kit 70-212-01 PMK 100 1/4 Rack Width Pole Mount Kit 70-217-01 MTP 15HD A Series • Reference Information...

  • Page 31: Cables/Connectors

    CAT 6 jack (Orange), qty. 10 100-479-01 CAT 6 jack (Gray), qty. 10 100-480-01 CAT 6 jack (White), qty. 10 100-481-01 CAT 6 jack (Ivory), qty. 10 100-482-01 Shielded RJ-45 for DTP26 cable 101-005-01 MTP 15HD A Series • Reference Information...
  • Page 32 In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.
  • Page 33 Inside USA / Canada Only Inside Europe Only Inside Asia Only Inside China Only Inside USA / Canada Only +1.919.863.1794 +31.33.453.4040 +65.6383.4400 +86.21.3760.1568 +1.714.491.1500 +1.919.863.1797 FAX +31.33.453.4050 FAX +65.6383.4664 FAX +86.21.3760.1566 FAX +1.714.491.1517 FAX © 2009 Extron Electronics. All rights reserved.

Table of Contents