Video Display - JVC GR-X5U Instructions Manual

MENUS FOR DETAILED ADJUSTMENT
38
EN
REC MODE
Allows you to set the video recording mode (SP
or LP) depending on your preference. It is
recommended you use "REC MODE" in VIDEO
menu when using this camcorder as a recorder
during dubbing. (
COPY
[OFF]: When the SNAPSHOT button is pressed
during tape playback, the playback image
pauses and normal playback will resume after
approximately 6 seconds. (The still image is not
recorded.)
ON: Enables dubbing of images recorded on a
tape to a memory card. (
BLANK SRCH
pg. 21, "Blank Search"
S/AV INPUT
[OFF]: Disables audio/video signal input from
the S/AV connector. (
A/V IN: Enables audio/video signal input from
the S/AV connector. (
S IN: Enables audio/S-video signal input from
the S/AV connector. (
Each setting is linked with "s SYSTEM", which
appears when the power switch is set to "M".
( pg. 33)
● The parameters are the same as in the
description on page 35.
[SP] / LP
pg. 46, 47)
pg. 28)
pg. 46)
pg. 46)
pg. 46)
SYSTEM

VIDEO DISPLAY

The "n" (VIDEO DISPLAY) settings are
effective only for video playback except
"BRIGHT", "LANGUAGE" and "AUX MIC"
● The parameters (except "OFF" in ON SCREEN
settings) are the same as in the description
(CAMERA DISPLAY) on page 36.
[ ] = Factory-preset
BRIGHT
pg. 16, "Brightness Adjustment of the
Display"
ON SCREEN
When set to "OFF", the camcorder's display
disappears.
DATE/TIME
When set to "AUTO", the date/time are displayed
in the following cases:
● When playback starts. The camcorder displays
the date/time when scenes are recorded.
● When the date is changed during playback.
TIME CODE
pg. 19, "Time Code"
LANGUAGE
/ / [ENGLISH] / FRANÇAIS /
ESPAÑOL / PORTUGUÊS
The language setting can be changed.
( pg. 15)
AUX MIC
pg. 36, "AUX MIC"
.
OFF / [LCD] / LCD/TV
[OFF] / AUTO / ON
[OFF] / ON
OFF / [ON]