Features For Recording; Led Light - JVC GR-DX97 GR-DX77 Instructions Manual

Each setting is linked with "s SYSTEM", which appears
when the Power Switch is set to "M".
The parameters are the same as in the description on
page 29.
VIDEO DISPLAY
The "n" (VIDEO DISPLAY) settings are effective only for
video playback except "BRIGHT" and "AUX MIC".
The parameters (except "OFF" in ON SCREEN settings)
are the same as in the description (CAMERA DISPLAY) on
page 29.
[ ] = Factory-preset
BRIGHT
pg. 13, "Brightness Adjustment Of The Display"
ON SCREEN OFF / [LCD] / LCD/TV
When set to "OFF", the camcorder's display disappears.
DATE/TIME [OFF] / AUTO / ON
When set to "AUTO", the date/time are displayed in the
following cases:
When playback starts. The camcorder displays the date/
time when scenes are recorded.
When the date is changed during playback.
TIME CODE [OFF] / ON
AUX MIC OFF / [ON]
pg. 30, "AUX MIC"
SYSTEM

FEATURES FOR RECORDING

SNAPSHOT

LED Light

LED Light
LED Light can be used to brighten the subject in the dark
place during video recording or D.S.C. shooting.
1
Press LIGHT repeatedly to change the setting.
OFF: Turns off the light.
ON: The light is on always. (
AUTO: The light turns on automatically when dark.
( appears.)
2
Press the Recording Start/Stop Button to start video
recording or SNAPSHOT to shoot a still image.
NOTES:
Be careful not to point the LED Light directly to eyes.
If the light does not reach the subject, the Night-Alive
function will be activated, and makes it possible to shoot
the subject brighter.
There is a difference in the brightness of the images shot
between the center area which is illuminated by the LED
Light and the surrounding areas (which will be darker).
Since subjects are shot at a reduced shutter speed when
the LED Light setting is "ON", they will appear slightly
blurred.
EN
Recording Start/Stop Button
SET
LIGHT
appears.)
31