Setting Print Information (Dpof Setting); Initializing A Memory Card - JVC GR-DX97 GR-DX77 Instructions Manual

ADDITIONAL FEATURES FOR D.S.C.
26
EN

Setting Print Information (DPOF Setting)

This camcorder is compatible with the DPOF (Digital
Print Order Format) standard in order to support future
systems such as automatic printing. You can select one
of the 2 print information settings for images stored in the
memory card: "To Print All Still Images (One Print For
Each)" or "To Print By Selecting Still Images And Number
Of Prints".
NOTES:
If you load a memory card already set as shown below in a
printer compatible with DPOF, it will make prints of the
selected still images automatically.
To print images recorded on a tape, first dub them to a
memory card. ( pg. 24)
To Print All Still Images (One Print For Each)
1
Display the playback screen of normal images
( pg. 22).
2
Press MENU. The Menu Screen appears.
3
Press or to select
"DPOF", and press SET. The Sub
Menu appears.
4
Press or to select "ALL 1",
and press SET. The DPOF screen
appears.
5
Press or to select
"EXECUTE", and press SET. The
normal playback screen appears.
To cancel selection, select
"RETURN".
To Print By Selecting Still Images And Number Of
Prints
1
Perform steps 1 – 3 in "To Print All Still Images (One
Print For Each)".
2
Press or to select
"CURRENT", and press SET. The
DPOF screen appears.
3
Press or to select the
desired file.
4
Press or to select the
number indication (00), and press SET.
5
Select the number of prints by
pressing to increase the
number, or to decrease the
number, and press SET.
Repeat steps 3 through 5 for the
desired number of prints.
The number of prints can be set up
to 15.
To correct the number of prints, select the image again and
change the number.
6
"RETURN", and press SET. The
"SAVE?" appears.
If you did not change any settings in
step 3 through 5, the Menu Screen
reappears.
7
"EXECUTE" to save the setting you have just made, and
press SET.
To cancel selection, select "CANCEL".
To Reset The Number Of Prints
1
Print For Each)".
2
The DPOF screen appears.
3
The normal playback screen appears.
To cancel selection, select "RETURN".
The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this
M E NU
may cause the memory card to be corrupted.
DPOF CUR RENT
AL L 1
RESET
RETURN
You can initialize a memory card any time.
After initializing, all files and data stored in the memory
DPOF
card, including those which have been protected, are
cleared.
AL L 1 ?
1
EXECUTE
2
RETURN
the Lock Button located on the switch.
3
4
"FORMAT", and press SET. The
FORMAT screen appears.
5
DPOF
"EXECUTE", and press SET. The
memory card is initialized.
When initialization is finished, "NO
SHEETS
IMAGES STORED" or "NO E-MAIL CLIP STORED"
0 0
RETURN
appears.
To cancel initialization, select "RETURN".
CAUTION:
Do not perform any other operation (such as turning off the
DPOF
camcorder) during initialization. Also, be sure to use the
provided AC Adapter, as the memory card may be corrupted
if the battery becomes exhausted during initialization. If the
SHEETS
memory card becomes corrupted, initialize it.
0 5
Press or to select
Press or to select
Perform steps 1 – 3 in "To Print All Still Images (One
Press or to select "RESET", and press SET.
Press or to select "EXECUTE", and press SET.

Initializing A Memory Card

Set the VIDEO/MEMORY Switch to "MEMORY".
Set the Power Switch to "PLAY" while pressing down
Press MENU. The Menu Screen appears.
Press or to select
Press or to select
DPOF
SAVE?
EXECUTE
CANCEL
F ORMAT
ERASE AL L
EX I ST I NG DATA?
EXECUTE
RETURN