Polycom SoundPoint IP 32x User Manual page 55

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
3. Using
then press
— Always—For all incoming calls
— No Answer—Once all options to accept calls have been taken
— Busy—When you are already in a call
4. Depending on your selection:
If you select Always, enter a number to forward all future incoming
a
calls to.
If you select No Answer, enter a number to forward all unanswered
b
incoming calls to and how many rings to wait before forwarding (one
ring is approximately six seconds). A value of 2 is recommended.
If you select Busy, enter a number to forward all future incoming calls
c
to when you are already in another call.
Note You can also enter the SIP URL or IP address. For more information on using a SIP
URL or IP address, refer to
5. Select the Enable soft key to confirm call forwarding.
Select the Exit soft key to cancel any changes.
The idle display returns with a moving arrow as the line label to confirm
call forwarding is enabled.
To disable call forwarding:
1. Press
2. (Optional) If multiple lines are configured on your phone, select the line
to forward from the list using
3. Using
then press the Select soft key.
4. Press the Disable soft key to turn off call forwarding.
The idle display returns and the regular icon appears as the line indicator.
Using the Basic Features of Your SoundPoint IP 32x/33x Phone
and , select the forwarding type you want to change and
. The options are:
Placing a Call on page
and select Features > Forward.
and
and , select the forwarding type you want to change and
3-2
.
3 - 13