Setting Date And Time; Internal Lithium Battery Recharge; Lp Mode; Audio Recording Mode - Panasonic Palmcorder Multicam PV-DC152 Operating Instructions Manual

Digital video camcorder
Hide thumbs Also See for Palmcorder Multicam PV-DC152:
Table of Contents

Advertisement

CLOCK-SET
YEAR
:2002
MONTH :JAN
DAY
:20
HOUR
: 8PM
MINUTE:46
PUSH MENU TO RETURN
1, 2
1, 3
1
CAMERA FUNCTIONS
1.CAMERA SETUP
2.DIGITAL EFFECT
3.CARD SETUP
4.MULTI-PICTURES
5.RECORDING SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS
PUSH MENU TO EXIT
1
RECORDING SETUP
REC-SPEED
SP
LP
AUDIO-REC
12bit
INDEX
2HOUR
WIND-CUT
OFF
ON
ZOOM MIC
RETURN
---- YES
PUSH MENU TO EXIT
2
RECORDING SETUP
REC-SPEED
SP
AUDIO-REC
16bit
12bit
INDEX
2HOUR
WIND-CUT
OFF
ON
ZOOM MIC
RETURN
---- YES
PUSH MENU TO EXIT

Setting Date and Time

1
Press the [MENU] Button and rotate the [PUSH] Dial to select
[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].
2
Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/
[DAY]/[HOUR]/[MINUTE] and set it to a desired value.
≥Year will cycle in the order shown below.
2000 ) 2001 ) ... ) 2089 ) 2000 ) ...
3
Press the [MENU] Button to finish setting the date and time.
≥The clock operation starts from [00] seconds.
≥The menu will disappear when the [MENU] button is pressed again.
≥It is possible that the built-in clock in the Palmcorder may become
inaccurate. Please check the time before recording. If the [0] Indication is
flashing, charge the built-in lithium battery and reset the date and time.
~~~~~~~~~~~~~~~~~~~~~~~~~

Internal Lithium Battery Recharge

The internal lithium battery sustains the operation of the clock. When the [0]
1
Indication

1 1 1 1
Connect the AC Adaptor to the Palmcorder with the power
turned off and then connect to the AC Jack.
≥After charging for 4 hours, the built-in lithium battery can power the
clock for approximately 3 months.
~~~~~~~~~~~~~~~~~~~~~~~~~

LP Mode

A desired recording speed can be selected with [REC-SPEED] on the
[RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording time becomes 1.5 times longer
than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-like noise patterns may appear on a playback image, or some normal
functions may be restricted.
≥The contents that are recorded in LP Mode are not completely compatible
with other equipment.
≥Audio Dubbing is not possible with LP Mode. (l 33)
~~~~~~~~~~~~~~~~~~~~~~~~~

Audio Recording Mode

The sound quality of the recorded sound can be selected with [AUDIO-REC]
on the [RECORDING SETUP] Sub-Menu.
High sound-quality recording is possible with "16bit 48kHz 2 track" Mode.
With the "12bit 32kHz 4 track" Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for re-recording.
is lit, the internal lithium battery is near exhaustion.
1
2
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents