Table of Contents
Advertisement
Installation of Art Cool Type Indoor Unit
• Please read this instruction sheet completely before installing the product.
• When the power cord is damaged, replacement work shall be performed by authorized personnel only.
• Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Installation Parts Provided
1. Installation guide map
2. Type "A" screw and plastic anchors
3. Type "B" screws
4. Holder Remote Control
Required Parts
Installation plate
Four type "A" screws
Connecting cable
Pipes: Gas side.....................................Ø12.7, Ø9.53
Liquid side..............................................Ø6.35
(Refer to page 4)
Insulation materials
Additional drain pipe
(Outer Diameter............................................15.5mm)
Two type "B" screws
Installation of Art Cool Type Indoor Unit
16
Cooling & Heating Model has
included Drain Elbow.
Required Tools
Level gauge
Screw driver
Electric drill
Hole core drill(ø70mm)
Flaring tool set
Specified torque wrenches
1.8kg.m, 4.2kg.m, 5.5kg.m, 6.6kg.m
(different depending on model No.)
Spanner......................................................Half union
A glass of water
Screw driver
Owner's manual
Thermometer
Holder Remote Control
Advertisement
Table of Contents
