General; Ib-583 - Furuno RC18xx Series User Manual

5. RC1815/RC1825 Equipment Setup
5.6 IB-583 NBDP Terminal
Refer to the Installation Manual, FS-1570 (150W) / FS-2570 (250W)

5.6.1 General

1) Power up the unit.
2) Press the [F6] key, to enter the System menu.
3) Use the arrow keys to select Change.
4) Use the down arrow key to highlight Self Test.
5) Verify all test are OK and that the self-test prints out.
5.6.2 ID Codes
1) Press the [F5] key, to enter the Station menu.
2) Press the key to select the ID to be entered:
6: Group ID Entry (4/5 digit)
7: Group ID Entry (9 digit)
8: Select ID Entry (4/5 digit)
9: Select ID Entry (9 digit)
(If an incorrect entry is made, refer to the Dealers Manual, Pg. 9)
5.6.3 Answerback Code
1) Press the [F5] key, to enter the Station menu.
2) Press the [5] key to select Answerback Code Entry.
3) Enter the Answerback code in the following format:
Example: 123456789 FURU X
This format is the 9 digit MMSI, 4 letters and X.
(If an incorrect entry is made, refer to the Dealers Manual, Pg. 9)
5-8