Table of Contents
Advertisement
NETWORK menu
Item
PROJECTOR
NAME
(continued on next page)
(1) Use the ▲/▼ buttons on the
NETWORK menu to select the
PROJECTOR NAME and press
the ► button. The PROJECTOR
NAME dialog will be displayed.
(2) The current PROJECTOR NAME will be displayed on the first 3
lines. Particular projector name is pre-assigned by default.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to
select and enter characters.
To erase 1 character, press the RESET button or press the ◄
and INPUT button at the same time. Also if you move the cursor
to DELETE or ALL CLEAR on screen and push the ENTER or
INPUT button, 1 character or all characters will be erased.The
PROJECTOR NAME can be input up to 64 characters.
(3) To change an already inserted
character, press the ▲/▼ button
to move the cursor to one of the
first 3 lines, and use the ◄/►
buttons to move the cursor on the
character to be changed. After
pressing the ENTER or INPUT
button, the character is selected.
Then, follow the same procedure
as described at the item (2) above.
(4) To finish entering text, move the cursor
to the OK on screen and press the ►, ENTER or INPUT button.
To revert to the previous PROJECTOR NAME without saving
changes, move the cursor to the CANCEL on screen and press
the ◄, ENTER or INPUT button.
Description
75
Advertisement
Table of Contents
