Table of Contents
Advertisement
NETWORK menu
Item
WIRED SETUP
(continued)
WIRED
INFORMATION
(continued on next page)
74
Use the ▲/▼ buttons to enter the TIME
DIFFERENCE.
Set the same TIME DIFFERENCE as the one
set on your computer. If unsure, consult your IT
manager.
TIME
Use the ► button to return to the menu after
DIFFERENCE
setting the TIME DIFFERENCE.
• When this item is set, the same item in the
WIRELESS SETUP menu is overwritten with the
same setting (69).
Use the ▲/▼/◄/► buttons to enter the Year (last
two digits), Month, Date, Hour and Minute.
• When this item is set, the same item in the
WIRELESS SETUP menu is overwritten with the
same setting (70).
• The projector will override this setting and retrieve
DATE AND
DATE AND TIME information from the Time server
TIME
when SNTP is enabled. (Date/Time Settings in
the Network Guide)
• This setting will be reset if the projector is turned
off while STANDBY MODE in the SETUP menu
is set to SAVING (46), or when the AC power is
turned off.
Selecting this item displays the WIRED INFORMATION dialog for
viewing the wired LAN settings.
• For details of PASSCODE, refer to the manual for "LiveViewer".
• Only the first 16 characters of the PROJECTOR NAME are dis-
played.
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
"0.0.0.0" when DHCP is ON and the projector has not gotten address
from DHCP server.
Description
Advertisement
Table of Contents
