Table of Contents
Advertisement
Troubleshooting
Regarding the indicator lamps (continued)
POWER
LAMP
indicator
indicator
Lighting
Lighting
In
Red
In
Orange
Blinking
Blinking
In
Orange
In
Red
Turned
Turned
off
off
NOTE
• When the interior portion has become overheated, for safety purposes,
the projector is automatically shut down, and the indicator lamps may also be
turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.
After the projector has sufficiently cooled down, please make confirmation of the
attachment state of the lamp and lamp cover, and then turn the power on again.
112
TEMP
indicator
Lighting
Loading the saved data of CLONING on STANDBY
In
Red
MODE.
Loading the saved data of CLONING has failed on
Blinking
STANDBY MODE.
In
Red
Please refer to CLONING (64 ~ 67).
Turned
Loading the saved data of CLONING has
off
succeeded on STANDBY MODE.
Description
Advertisement
Table of Contents
