16
Chapter 3
5. Open the AppleTalk control panel.
6. Open the "Connect via" pop-up menu and select the Ethernet slot
7. Open the Chooser and confirm that AppleTalk is active. You may
where the card is installed. If a message asks you to confirm the
change of network connections, click OK.
You may also need to choose a zone. If zones are available, the
"Current zone" pop-up menu will be active. When you are finished,
close the control panel and save your settings.
also select network services in the Chooser. Wnen you are
finished, close the Chooser. Your computer is now configured for
Ethernet.