Table of Contents
Advertisement
Troubleshooting
Troubleshooting
A. The appliance is not working
Possible causes:
1.The socket is not the required one, or that connection is loose.
2.The door is not properly closed or the switch of micro delay in poor contact.
3.The plug wire of the motor is in poor contact, or the motor broken.
4.Malfunction of electronic module.
Troubleshooting
1.Check the socket and plug to make sure they are properly connected.
2.Check whether the micro delay switch is in good contact with" On-position". If
yes, insert the terminal firmly to provide good connection.
3.The electronic module controls the rotary speed and direction of the motor. In
case of failure, check the wiring or replace the electronic module.
B. Filling failure
Possible causes:
1.The switch of water supply is not opened or the water pressure is too low.
2.The door is not properly closed or the micro delay switch is in poor contact
3.The water electromagnetic valve is broken.
4.The plug wire of drainage pump is in poor contact.
5.The pressure switch is broken.
17
Hide quick links:
Advertisement
Table of Contents
