E-Mu Classic keys Operation Manual page 118

MIDI
Specification
116
REFERENCE SECTION
CHANNEL BANK SELECT MESSAGES
The following standard MIDI controllers will
be mapped to MIDI Bank Select:
0x00 (0) Bank Select MSB
0x20 (32) Bank Select LSB
After a valid Bank Select message has been
received, any subsequent program changes
on that channel will occur within the
selected bank. Partial or invalid bank select
messages on a channel will not affect the
bank selected for that channel. The BANK/
PRST CHANGE screen will be updated if
necessary to reflect the newly selected bank.
The possible range of controller values are:
0x0000 - Classic Keys Bank 0
0x0001 - Classic Keys Bank 1
0x0002 - Classic Keys Bank 2
0x0003-0xffff - Classic Keys Bank 3
(Note that controller values specifying bank
numbers greater than Bank 3 are clipped.
Note also that, because of a difference in
naming conventions, Proteus Bank 0
corresponds to MIDI Bank 1 as defined in
the MMA spec.)
As per the MIDI spec, these messages must
be sent in MSB/LSB order without interven-
ing messages; response to these messages in
any other order or format is undefined, but
Classic Keys will generally not respond to
anything but the MSB followed directly by
the LSB on the same channel.