Initial Setup; Auto Tuner Setup; Channel Summary - JVC I'Art Pro RM-C1257G User Manual

Auto Tuner Setup

If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please
skip ahead to "Channel Summary" to continue setting up your television. In Auto Tuner Setup,
the TV automatically scans through all available channels, memorizing the active ones and
skipping over blank ones or channels with weak signals. This means you scan using the
C +/- buttons), you will receive only clear active channels.
HANNEL
Press the M
π †
To AUTO TUNER SETUP
è
To operate
è
To choose CABLE or AIR
Press the O
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the M

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an "√". You can delete
channels from the scan by removing the "√". If any channels
were missed during auto tuner setup and you wish to add
them, you may by placing an "√" next to the channel number.
è
To the SCAN column
π †
Press the O
Press the M
You can block access to a channel by activating the channel lock.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
è
To the Lock Column (
π †
Press the Z
Press the M
button
ENU
button to start
K
button when finished
ENU
button
ENU
button to include or delete from scan
K
button when finished
ENU
button
ENU
)
button to lock or unlock that channel
ERO
button when finished
ENU

Initial Setup

AUTO TUNER SETUP
TUNER MODE
PRESS TO START
OK
SELECT OPERATE
CHANNEL SUMMARY
CHNO. SCAN ID
01
02 MTV
03
04 A&E
05 E!
SELECT OPERATE
OK
CABLE
EXIT
MENU
CHNO. SCAN ID
06 HBO
07 L
08
09
10
EXIT
MENU
23