COLOUR TELEVISION MODEL WITH THE TELETEXT FUNCTION AV-14FMT4 AV-21CMT4 AV-21DMT4 AV-21YMT4 MODEL WITHOUT THE TELETEXT FUNCTION AV-14AG14 AV-14AMG4 AV-14FMG4 AV-14FMG4B AV-20NMG4 AV-21CG14 AV-21CMG4 AV-21DMG4 AV-21FMG4B AV-21LMG4 AV-21TG14 AV-21TMG4 AV-21YMG4 INSTRUCTIONS Contents Knowing your TV’s features ... 2 Remote control buttons and basic functions . 3 TV buttons and functions ...
4 Do not allow objects or liquid into the cabinet openings. 5 In the event of a fault, unplug the unit and call a JVC service technician. Do not attempt to repair it yourself or remove the rear cover. 6 The surface of the TV screen is easily damaged. Be very careful with it when handling the TV.
Remote control buttons and basic functions RM-C1260 WITH THE TELETEXT FUNCTION (AV-14FMT4/AV-21CMT4/ AV-21DMT4/AV-21YMT4) No. Press POWER Turn on or off the TV from standby mode. MENU/OK Display menu and confirm selected function. 5/∞/2/3 Select and adjust menu function. CHANNEL M Select the desired channel number.
Page 4
Remote control buttons and basic functions How to operate menus and menu locations Press the MENU/OK button 2. Display the MENU. Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2.
TV buttons and functions The following illustrations are for AV-14FMG4 and AV-21TG14 only, which are used for explanation purpose. Your TV may not look exactly like the illustrated. Front of the TV AV-14FMG4 AV-21TG14 Rear of the TV AV-14FMG4 VIDEO-1 INPUT No.
• Use AA/R6/UM-3 dry cell batteries. • If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use. 4 Turn on the TV by pressing the main power button. JVC logo appears on the screen.
Page 7
• If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO PROGRAM functions to make the initial settings. Those functions are located in the INSTALL menu. • If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings. AUTO PROGRAM...
Basic setting for picture COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. AUTO NTSC4.43 NTSC3.58 To operate this function with a menu: ❇...
Advance setting for picture BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF.
Basic setting for sound SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. The function is not available in video mode. For the sound system in each country or region, see the table below: Area...
Favorite channel and video setting To register the favorite channel You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (PR01- 99) you desired to register. 2 Press and hold a colour button for 3 seconds or more.
Customized setting You can reduce the noise. Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function. ❇ MENU PICTURE PICTURE FEATURES VNR is turned off. AUTO Effect of VNR is automatically controlled. Effect of VNR becomes minimum level.
TV channel presetting To register the TV channels auto- matically You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. ❇ MENU INSTALL 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically.
Page 14
TV channel presetting To add in the new channel (INSERT in the EDIT menu) You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number correspond- ing to the channel number of the TV channel from the attached sheet “CH/CC number list”...
Additional preparation The illustrations shown in this section are for AV-14FMG4 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection. •...
Specifications TV RF systems B/G, I, D/K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50/60 Hz External input / output...