Summary of Contents for JVC HV-36P38SUE, HV-32P37SUE, HV-28P37SUE
Page 1
HV-36P38SUE HV-32P37SUE HV-28P37SUE COLOUR TELEVISION FARBFERNSEHGERÄT TELEVISEUR COULEUR KLEURENTELEVISIE TELEVISOR A COLOR TELEVISORE A COLORI TELEVISOR A CORES ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO PORTUGUÊS INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS GEBRUIKSAANWIJZING MANUAL DE INSTRUCCIONES ISTRUZIONI INSTRUÇÕES...
Page 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
3D CINEMA SOUND function... 17 Return to TV channel instantly... 17 Using the FREEZE function ... 17 Using the MULTI-PICTURE function ... 18 Operating a JVC brand VCR or DVD player... 19 Teletext function ...20 Basic operation ... 20 Using the List Mode ... 20 Hold...
Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If connecting a VCR, follow A A A A →...
Connecting and placing the woofer unit (HV-36P38SUE only) Connect the supplied woofer connector to the woofer terminal on the back of the TV. If the woofer unit is not connected, you will not be able to enjoy the bass sound. •...
Follow the instructions on the on- screen display to make the initial settings. 1 Press the Main power button on the The Power lamp lights red (for power on), then green (for TV on) and the JVC logo is displayed. HV-36P38SUE Power lamp...
Page 8
• The JVC logo appeares only once when your TV has been turned on. In this case, use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “SET UP menu” on page 32. 2 Press the a a button The LANGUAGE menu appears.
Page 9
Setting up your TV 6 Press the a a button to display the T-V LINK menu T-V LINK DOWNLOAD TV EXIT D0005-EN If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu.
TV by a fully wired SCART cable. A “T-V LINK compatible VCR” means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the features described below.
Page 11
Setting up your TV Pre-set Download Download the registered data on the TV channels from the TV to the VCR. The Preset Download function automatically begins when the initial setting is complete or whenever the AUTO PROGRAM or EDIT/ MANUAL operations are performed. •...
TV buttons and functions HV-36P38SUE EXT-5 EXT-5 Refer to the pages in parentheses for details. 1 Remote control sensor 2 Power lamp (pages 6, 12) 3 Main power button (pages 6, 12) 4 Headphone jack (mini jack) (page 40) 5 P p buttons/ q buttons (page 12) 6 r (Volume) button (page 12) 7 EXT-5 terminal (pages 37, 40) HV-32P37SUE/HV-28P37SUE...
TV buttons and functions Turn the Main power on Press the Main power button on the The Power lamp lights red and your TV is in the standby mode. • If the Power lamp lights green, the TV is already on. To turn the Main power off: Press the Main power button again.
Remote control buttons and functions 1 Muting button 2 Number buttons 3 Information button 4 c button 5 3 sound button 6 b button 7 7 buttons 8 g (Text) button 9 p p buttons 0 VCR/DVD/Teletext control buttons - p buttons = # (Standby) button ~ VCR/TV/DVD switch ! G button...
Remote control buttons and functions Choose a TV channel and watch images from external devices • If the picture is tilted, correct it. See “PICTURE TILT” on page 36. Use the number buttons: Enter the programme number (PR) of the channel using the number buttons.
Adjust the volume Press the r q buttons to adjust the volume. The Volume indicator appears and the volume changes as you press the r q buttons. Muting the sound Press the l l l l (muting) button to turn off the sound. Pressing the l (muting) button again restores the previous volume level.
Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to...
2 Press the 6 6 buttons to choose a ZOOM mode. Then press the a button The picture expands and the chosen ZOOM mode is displayed in about 5 seconds. • The ZOOM mode may be automatically changed due to the control signal from an external device.
Remote control buttons and functions To cancel the FREEZE function: Press the f button, the p p buttons or the number buttons. • The FREEZE function does not work while a sub-picture is displayed. • The still picture cannot be output from the TV.
Remote control buttons and functions Operating a JVC brand VCR or DVD player You can operate a JVC brand VCR or DVD player. Pressing the button having the same appearance as the original remote control button of a device makes the function work in the same way as the original remote control.
Teletext function Basic operation You can view three types of teletext broadcasts on the TV: FLOF (Fastext), TOP and WST. 1 Choose a TV channel with a teletext broadcast 2 Set the VCR/TV/DVD switch to the TV position 3 Press g g (Text) button to display the teletext Pressing g (Text) button changes the...
3 Press and hold down A A A A (Store) button The four page numbers blink white to indicate that they are stored in memory. To call up a stored page: 1 Press the B B button to engage the List mode 2 Press a colour button to which a page has been assigned To exit the List mode:...
Teletext function Cancel You can search for a teletext page while watching TV. 1 Press the Number button to enter a page number, or press a Colour button The TV searches for a teletext page. 2 Press H H (Cancel) button The TV programme appears.
Using the TV’s menu This TV has a number of functions which you can operate using menus. To fully utilize your TV’s functions, you need to fully understand the basic menu operating techniques. Buttons used to operate the menus Basic operation 1 Press the H H button to display the menu bar...
PICTURE menu PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR COLOUR TEMP. FEATURES D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. > FEATURES DIGITAL VNR AUTO(LOW) Super DigiPure MOVIE THEATRE Colour DigiPure COLOUR SYSTEM 4:3 AUTO ASPECT D1015-EN DIGITAL VNR The DIGITAL VNR function cuts down the amount of noise in the original picture.
PICTURE menu MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN. • The MIN setting is not suitable for high- quality pictures which contain very little noise.
Page 28
AUTO: This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal. • The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
SOUND menu SOUND STEREO/ BASS TREBLE BALANCE HEADPHONE VOLUME 3D CINEMA SOUND D0019-EN • Functions in the “SOUND” menu other than “HEADPHONE VOLUME” work for the TV speakers. They do not work for the sound from the headphones. • When the headphones are connected and only one screen is displayed, only “HEADPHONE VOLUME”...
FEATURES menu FEATURES SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER. Then press the a a or 3 3 3 3 button A Sub-menu of the SLEEP TIMER function appears.
Page 31
FEATURES menu 3 Press the a a button The Sub-menu of CHILD LOCK appears. > CHILD LOCK BBC1 D0026-EN 4 Press the 6 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen.
APPEARANCE Press the 5 button and choose the format in which the channel number is displayed from the three types: TYPE A, TYPE B and TYPE C. BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device.
SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE PICTURE TILT DECODER(EXT-2) EXT SETTING D0029-EN AUTO PROGRAM The AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” (page 6) can be preformed again. 1 Choose AUTO PROGRAM, then press the a a or 3 3 3 3 button The COUNTRY menu appears as a sub-...
Page 34
Basic operation 1 Choose EDIT/MANUAL, then press the a a or 3 3 3 3 button The EDIT menu appears. > EDIT CH/CC CH/CC BBC1 CH/CC CH/CC 31 MOVE INSERT D0038-EN 2 Follow the operation description of a function you want to use and operate the function 3 Press the a a button to complete...
Page 35
SET UP menu DELETE 1 Press the 6 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) appears on the screen.
Page 36
• When the COUNTRY setting is not FRANCE, use a two-digit CH/CC number. When the COUNTRY setting is FRANCE, use a three-digit CH/CC number. INSERT 1 Press the 6 6 buttons to choose a Programme number (PR) for which you will register a new TV channel 2 Press the green button and start the INSERT function >...
SET UP menu 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to fine- tune the TV channel. If you cannot hear the normal sound even when the picture of the TV channel appears normally: The SYSTEM setting is wrong.
4 Press the 5 5 buttons to choose An unscrambled picture appears. To cancel the DECODER (EXT-2) function: Press the 5 buttons to choose OFF. 5 Press the a a button to complete the setting The T-V LINK menu appears. T-V LINK DOWNLOAD TV EXIT...
Page 39
SET UP menu Preparation: • At first, read the Device Instruction Manual and “Additional preparation” on page 40 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that an S-VIDEO signal (Y/C signal) can be output to the TV.
Page 40
3 Press the 6 6 buttons to choose a name. Then press the a a button The ID LIST disappears and the name is assigned to the EXT terminal. • You cannot assign an EXT terminal name not found in the name list (ID LIST).
Additional preparation Connecting the external devices Connect the devices to the TV, paying attention to the following connection diagram. Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure.
Page 42
HV-32P37SUE/HV-28P37SUE Back of the TV EXT- EXT- EXT- EXT- AUDIO OUT Back of the TV EXT- EXT- EXT- EXT- AUDIO OUT Additional preparation...
Additional preparation Devices which can output the S- VIDEO signal (Y/C signal) such as a S-VHS VCR Connect the device to an EXT terminal other than the EXT-1 terminal. You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal).
CH/CC numbers When you want to use the INSERT function on page 35, find the CH/CC number corresponding to the Channel number of the TV channel from this table. Channel CH 02 / CH 202 E2, R1 CH 40 / CH 240 CH 03 / CH 203 E3, ITALY A CH 41 / CH 241...
Page 45
CH/CC numbers • When two CH/CC numbers correspond to one Channel number, choose either one according to the current COUNTRY setting. When the COUNTRY setting is other than FRANCE, choose a two-digit CH/CC number. When the COUNTRY setting is FRANCE, choose a three-digit CH/ CC number.
Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
Page 47
Troubleshooting • Has COLOUR or BRIGHT been controlled properly? Follow the description “BRIGHT” or “COLOUR” on page 24 to try to adjust them properly. • Videotaping teletext is not recommended because it may not record correctly. • When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured.
Page 48
• It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a malfunction. This is the time required for the image to stabilize before it can be displayed. •...
Specifications Model Item Broadcasting systems Colour systems Channels and frequencies Sound-multiplex systems Teletext systems Power requirements Power consumption Picture tube size Audio output Speakers EXT-1 terminal EXT-2 terminal EXT-3 terminal EXT-4 terminal EXT-5 terminal AUDIO OUT terminal Headphone jack Dimensions (W × H × D) Weight Accessories Design and specifications subject to change without notice.
Page 50
Model Item Broadcasting systems CCIR B/G, I, D/K, L Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies • E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2, F2-F10, F21-F69, R1-R12, R21-R69 •...
Page 52
HV-36P38SJE HV-32P37SJE HV-28P37SJE COLOUR TELEVISION INSTRUCTIONS...
Page 53
Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
Page 54
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Page 55
3D CINEMA SOUND function... 19 Return to TV channel instantly... 19 Using the FREEZE function ... 19 Using the MULTI-PICTURE function ... 20 Operating a JVC brand VCR or DVD player... 21 Teletext function ...22 Basic operation ... 22 Using the List Mode ... 22 Hold...
Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If you are connecting a VCR, follow A A A A →...
Connecting and placing the woofer unit (HV-36P38SJE only) Connect the supplied woofer connector to the woofer terminal on the back of the TV. If the woofer unit is not connected, you will not be able to enjoy the bass sound. •...
JVC logo. Follow the instructions on the screen display to make the initial settings. 1 Press the main power button on the The power lamp lights red (for power on), then green (for TV on) and the JVC logo appears. HV-36P38SJE Power lamp...
Page 60
• If the JVC logo does not appear this is because your TV has already been turned on for the first time: use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “SET UP menu” on page 33.
Page 61
Setting up your TV 6 Press the a a button to display the T-V LINK menu T-V LINK DOWNLOAD TV EXIT D0005-EN If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu.
• If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station. • If you don’t want to use the ACI function, press the 6 buttons to choose ACI SKIP and then press a.
To use T-V LINK functions: A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier.
TV buttons and functions HV-36P38SJE EXT-5 EXT-5 See the pages in parentheses for details. 1 Remote control sensor 2 Power lamp (pages 8, 14) 3 Main power button (pages 8, 14) 4 Headphone jack (mini jack) (page 42) 5 P p buttons/ q buttons (page 14) 6 r (Volume) button (page 14) 7 EXT-5 terminal (pages 39, 42) HV-32P37SJE/HV-28P37SJE...
TV buttons and functions Turn the main power on Press the main power button on the The power lamp lights red and your TV is in standby mode. • If the power lamp lights green, the TV is already on. To turn the main power off: Press the main power button again.
Remote control buttons and functions 1 Muting button 2 Number buttons 3 Information button 4 c button 5 3 sound button 6 b button 7 7 buttons 8 g (Text) button 9 p p buttons 0 VCR/DVD/Teletext control buttons - p buttons = # (Standby) button ~ VCR/TV/DVD switch ! G button...
Remote control buttons and functions Choose a TV channel and watch images from external devices • If the picture is tilted, correct it. See “PICTURE TILT” on page 38. Use the number buttons: Enter the programme number (PR) of the channel using the number buttons.
Adjust the volume Press the r q buttons to adjust the volume. The volume indicator appears and the volume changes as you press the r q buttons. Muting the sound Press the l l l l (muting) button to turn off the sound. Pressing the l (muting) button again restores the previous volume level.
Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to...
Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indicator The indicator appears.
Remote control buttons and functions To cancel the FREEZE function: Press the f button, the p p buttons or the number buttons. • The FREEZE function does not work while a sub-picture is displayed. • The still picture cannot be output from the TV.
# (standby) button. 2 Press the VCR/DVD Control Button to control your VCR or DVD player • If your device is not made by JVC, these buttons will not work. • Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using.
Teletext function Basic operation You can view three types of teletext broadcasts on the TV: FLOF (Fastext), TOP and WST. • TOP is not available when the COUNTRY setting is UNITED KINGDOM. 1 Choose a TV channel with a teletext broadcast 2 Set the VCR/TV/DVD switch to the TV position...
3 Press and hold down the A A A A (Store) button The four page numbers blink white to show that they are stored in memory. To call up a stored page: 1 Press the B B button to enter the List mode 2 Press a colour button having a stored page...
Teletext function Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page number, or press a colour button The TV searches for a teletext page. 2 Press H H (Cancel) button The TV programme appears.
Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. Buttons used to operate the menus Basic operation 1 Press the H H button to display the menu bar...
PICTURE menu PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR COLOUR TEMP. FEATURES D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. > FEATURES DIGITAL VNR Super DigiPure MOVIE THEATRE Colour DigiPure COLOUR SYSTEM 4:3 AUTO ASPECT D1015-EN DIGITAL VNR The DIGITAL VNR function cuts down the amount of ‘noise’ (‘snow’ or interference) in the original picture.
Page 79
PICTURE menu MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN. • The MIN setting is not suitable for high- quality pictures which contain very little noise.
Page 80
AUTO: This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal. • The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
SOUND menu SOUND STEREO/ BASS TREBLE BALANCE HEADPHONE VOLUME 3D CINEMA SOUND D0019-EN • Functions in the “SOUND” menu other than “HEADPHONE VOLUME” work for the TV speakers. They do not work for the sound from the headphones. • When the headphones are connected and only one screen is displayed, only “HEADPHONE VOLUME”...
FEATURES menu FEATURES SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER. Then press the a a or 3 3 3 3 button A Sub-menu of the SLEEP TIMER function appears.
FEATURES menu 4 Press the 6 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen.
SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE PICTURE TILT DECODER(EXT-2) EXT SETTING D0029-EN AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” (page 8). To receive SKY 1 you need a satellite tuner. You must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function.
Page 85
SET UP menu Basic operation 1 Choose EDIT/MANUAL, then press the a a or 3 3 3 3 button The EDIT menu appears. > EDIT BBC1 BBC2 MOVE D0038-EK 2 Follow the description for the function you want to use 3 Press the a a button to complete the settings...
DELETE 1 Press the 6 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen.
Page 87
SET UP menu • When the COUNTRY setting is not FRANCE, use a two-digit CH/CC number. When the COUNTRY setting is FRANCE, use a three-digit CH/CC number. INSERT 1 Press the 6 6 buttons to choose a programme number (PR) for which you will register a new TV channel 2 Press the green button and start the INSERT function...
Page 88
5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to fine- tune the TV channel. 6 Press the a a button and register the TV channel to a Programme number (PR) The normal EDIT menu is resumed.
SET UP menu LANGUAGE The LANGUAGE setting which was performed in the “Initial settings” (page 8) can be changed. 1 Choose LANGUAGE, then press the a a or 3 3 3 3 button A sub-menu of the LANGUAGE function appears. >...
6 Turn on the VCR, and then press the a a button to transmit the data to VCR The T-V LINK menu disappears once the data transmission ends. 7 If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 to 6 If the DECODER (EXT-2) function has been set to “ON”...
Page 91
SET UP menu 1 Press the 5 5 or 6 choose an EXT terminal > EXT SETTING EXT-1 EXT-3 EXT-5 D0110-EN 2 Press the yellow button and set the S-IN (S-VIDEO input). Then press the a An S-IN (S-VIDEO input) mark is displayed.
Page 92
DUBBING You can choose a signal source to be output from the EXT-2 terminal. You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing. 1 Press the 5 5 buttons to choose the arrow from the menu...
Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram.
Page 94
HV-32P37SJE/HV-28P37SJE Back of the TV EXT- EXT- EXT- EXT- AUDIO OUT Back of the TV EXT- EXT- EXT- EXT- AUDIO OUT Additional preparation...
Page 95
Additional preparation Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR Connect the equipment to an EXT terminal (but not the EXT-1 terminal). You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal).
Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
Page 97
Troubleshooting • When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV.
Specifications Model COUNTRY setting Broadcasting systems CCIR I Colour systems • The EXT terminals also support the Channels and frequencies E21-E69 Sound-multiplex systems NICAM (I) system Teletext systems FLOF (Fastext), WST (World Standard System) Power requirements 220 - 240 V AC, 50 Hz Power consumption 141 W (Standby: 2.0 W) Picture tube size...
Page 99
Model COUNTRY setting Broadcasting systems CCIR I Colour systems • The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies E21-E69 Sound-multiplex systems NICAM (I) system Teletext systems FLOF (Fastext), WST (World Standard System) Power requirements 220 - 240 V AC, 50 Hz Power consumption HV-32P37SJE: 137 W (Standby: 2.0 W) HV-28P37SJE: 127 W (Standby: 2.0 W)