Initial Setup; Auto Tuner Setup; Channel Summary - JVC AV 32D104 User Manual

Auto Tuner Setup

The auto tuner setup function is described on page 18 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
To AUTO TUNER SETUP
π †
è
To operate
è
To choose CABLE or AIR
To move to START
†
è
To start Auto Tuner Setup
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an "¸". You can
delete channels from the scan by removing the "¸". If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an "¸" next to the
channel number.
To the SCAN column
π †
è
To include or delete from scan
Press the E
You can block access to a channel by activating the channel lock.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
To the Lock Column (
π †
Press the Z
Press the E
button
ENU
button
ENU
button when finished
XIT
button
ENU
)
button to lock or unlock that channel
ERO
button when finished
XIT

Initial Setup

25