JVC HD-70G886 User Manual page 23

Quick Setup
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or Dolby Digital.
1) Connect the optical cable from the back of the TV to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in
the Digital Setup Menu. See page 78.
• Refer to your owners manual on using your amplifier.
i.LINK IN/OUT
S400(TS)
TV Rear Panel
OPTICAL OUT
Digital Audio
Connections
Amplifier
23