Table of Contents
Advertisement
Important Note:
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user's guide in a convenient place for future
reference. Keep the carton and original packaging for future use.
Model Number:
Serial Number:
Projection Television Users Guide
Illustration of HD-56G886 and RM-C14G
For Models:
HD-52G886
HD-52G786
HD-56G886
HD-56G786
LCT1866-001A-A
0505TNH-II-IM
Advertisement
Table of Contents
Related Manuals for JVC HD 56G786 - 56" Rear Projection TV
Summary of Contents for JVC HD 56G786 - 56" Rear Projection TV
- Page 1 Projection Television Users Guide For Models: HD-52G886 HD-52G786 HD-56G886 HD-56G786 Illustration of HD-56G886 and RM-C14G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide.
-
Page 2: Important Safety Precautions
5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. Changes or modifications not approved by JVC could void the warranty. * When you don’t use this TV set for a long period of time, be sure to disconnect both the power plug from the AC outlet and antenna for your safety. - Page 3 This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
- Page 4 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Page 5: Important Safety Precautions . 2 Warnings
Warnings Caring for the Cabinet Normally, light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water. You can add a few drops of mild liquid detergent to the water to help remove spots of oily dirt. - Page 6 Warnings Thank you for purchasing JVC’s model HD-52G886, HD-52G786, HD-56G886 or HD-56G786 HDTV-ready projection television which uses the high-quality HD-ILA projection system. This is one of the highest quality and most technologically advanced televisions available today. It is recommended that you read this instruction manual before using your television in order to learn about it’s many features.
- Page 7 Warnings 4. The television requires a lot of electrical power It is recommended that the television is connected directly to the wall socket, and not to another device. When connecting the television to a wall socket that is being used by another device, or when using an extension cord, be careful not to exceed the electrical capacity of the socket.
-
Page 8: Table Of Contents
Table of Contents Sound Adjust ..63 Important Safety Precautions . 2 Sound Settings ... . . 63 Warnings ... . 5 Adjust Sound Settings . - Page 9 Table of Contents Digital Setup ..78 Digital Setup ... . . 78 Antenna Level ... . . 78 Digital Sound .
-
Page 10: Quick Setup
Quick Setup Unpacking your TV Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include:... - Page 11 Used to make video connections with S-Video VCRs, Camcorders and DVD players. Used to connect JVC AV CompuLink capable components for an automated home theater. We recommend that before you start using your new television, you read your entire User’s Guide so you can learn about your new television’s many great features.
-
Page 12: Tv Models
Quick Setup TV Models NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. - Page 13 Quick Setup TV Models Front Panel Diagram LAMP/PROGRAM POWER LAMP/PROGRAM LED LAMP/PROGRAM POWER POWER BUTTON POWER LED • For information on the LED, see page 92. MODELS: HD-52G886, HD-52G786, HD-56G886, HD-56G786 Side Panel Diagram INPUT INPUT 4 MENU S-VIDEO OPERATE OVER CHANNEL VIDEO...
-
Page 14: Tv Remote Control
Quick Setup TV Remote Control POWER TV CATV VCR DVD ASPECT MULTI SCREEN TWIN INDEX SELECT SLEEP FREEZE SWAP ML/MTS DISPLAY INPUT i.LINK MENU RETURN+ TIMER TUNE THEATER VIDEO FAVORITE STATUS CHANNEL NATURAL SOUND CINEMA LIGHT C.C. MUTING GUIDE MENU BACK VCR CHANNEL VCR DVD... -
Page 15: Getting Started
To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or CH –. The channels will zip by at a rate of five channels per second. The right and left buttons will turn the volume up or down. -
Page 16: Connecting Your Devices
Quick Setup Connections Step 2 – Connecting Your Devices To make these connections, you will use plugs like the ones illustrated below. S-Video Cable Component Cables Composite Cables Audio Cables Used to make video connections with S-Video VCRs, Camcorders and DVD Used to connect audio/video players. -
Page 17: Vcr Connection
Quick Setup Connections VCR Connection Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables. - Page 18 Quick Setup Connections Diagram #2 Cable or Antenna Output Two-Way Splitter OUT OUT Two-Way Splitter OUT OUT (Attachment) Coaxial Cable S-VIDEO (Attachment) ATSC 75Ω /DIGITAL CABLE IN (VHF/UHF) OVER VIDEO TV Rear Panel AUDIO INPUT-3 TV Rear Panel S-VIDEO OVER TV Rear Panel VIDEO AUDIO...
- Page 19 Quick Setup Connections Connecting to Monitor/Recording Output Terminal S-VIDEO VIDEO AUDIO MONITOR /REC OUT TV Rear Panel Notes: • When you make this connection, set the Video-1 Monitor Out menu to ON. See page 57. • If you are receiving ATSC/Digital Cable signal, it can be outputted to the S-Video output terminal or Video (composite video) terminal.
- Page 20 JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input.
- Page 21 Quick Setup Connections Connecting to a Camcorder You may connect a camcorder, game console or other equipment to your television by using the side input jacks (Input 4) located on the side of the television. You can also connect these using the television’s rear input jacks, using the same instructions. INPUT INPUT 4 MENU...
-
Page 22: Connecting To The Surround Amplifier
Quick Setup Connections Connecting to the Surround Amplifier In multi-channel sound such as 5.1 channel, the speech characters are played back from the center speaker. A center speaker in a movie theater is set in back of the screen so it can recreate a conversation scene in the movie more naturally. - Page 23 Quick Setup Connections Connecting to an amplifier using your optical output You can connect an amplifier that has an optical digital input terminal by using an optical digital cable from the optical output. The signal that is output can be PCM or Dolby Digital. i.LINK IN/OUT S400(TS) TV Rear Panel...
- Page 24 Quick Setup Connections Connecting to a Digital TV Receiver By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in their digital form. TV Rear Panel AUDIO AV COMPULINK - DIGITAL OUT VIDEO (DIGITAL) AUDIO (DIGITAL) AUDIO OUT DTV Decoder...
- Page 25 Quick Setup Connections Connecting to an HDMI Compatible Device By connecting an HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible devices. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface.
- Page 26 Quick Setup Connections Connecting to an AV Receiver using your television's V1 Smart Input By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV.
-
Page 27: Tv Rear Panel
Setup, the video signal you are recording or playing back may stop or you may not be able to perform the Digital Auto Tuner Setup. • Your television can connect with i.LINK D-VHS decks and HD-Camcorders (JVC brand only). If you connect other brand devices, with i.LINK cable, they will not work. -
Page 28: Connecting To The Computer
Quick Setup Connections Connecting to the computer This TV can be used as a computer screen. Use a commercially available D-SUB cable to connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you want to listen to the sound from the computer, use a commercially available RCA cable to connect the INPUT-3 audio input terminal to the computer's audio output terminal. - Page 29 Quick Setup Connections Table of signals for each type of computer Resolution Vertical Horizontal Frequency Frequency (Hz) (kHz) 640 x 480 60.0 31.5 (VGA) 1024 x 768 60.0 48.4 (XGA) • Only the above formats are supported. • Even with the above formats at 60 Hz, some problems may be experienced depending on the quality of the synchronous signal.
-
Page 30: Interactive Plug In Menu
• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it. Language After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically switches to the LANGUAGE settings. You can choose to view your onscreen menus in three languages: English, French (Français) or Spanish (Español). - Page 31 Quick Setup Plug-In Menu Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public analog broadcasting stations. If you do not have this in your area, you will have to set the clock manually.
-
Page 32: Auto Tuner Setup
You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience. Notes: •... -
Page 33: Remote Programming
Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. -
Page 34: Vcr Codes
Remote Programming VCR Codes The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the D button, then enter the first code number listed with the 10 ISPLAY... -
Page 35: Dvd Codes
Remote Programming DVD Codes The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the D button, then enter the first code number listed with the 10 ISPLAY... -
Page 36: Search Codes
Remote Programming Search Codes Cable/Satellite Search Codes Function 1) Slide the first 2-Way Mode Selector switch to CATV. 2) Press the P and R +/TV buttons. Hold for at least three seconds and release. OWER ETURN 3) Press the P button on the remote, and see if the cable or satellite box responds. -
Page 37: Onscreen Menus
Onscreen Menus Using the Guide Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: π † Up and Down arrows mean press the C + or C –... -
Page 38: Onscreen Menu System
Onscreen Menus The Onscreen Menu System Your television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly. Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. -
Page 39: Initial Setup
Onscreen Menus Press the M button TO INITIAL SETUP 03 INITIAL SETUP CLOCK / TIMERS INITIAL SETUP PREVIOUS PREVIOUS PREVIOUS AUTO TUNER SETUP VIDEO-1MONITOR OUT SET CLOCK CHANNEL SUMMARY TV SPEAKER ON / OFF TIMER V-CHIP VARI AUDIO OUT LAMP TIMER RESET SET LOCK CODE SIZE1 DIGITAL-IN... -
Page 40: Initial Setup
Initial Setup Auto Tuner Setup The auto tuner setup function is described on page 32 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below. Press the M button AUTO TUNER SETUP To AUTO TUNER SETUP IN ANALOG π... -
Page 41: Channel Summary
Initial Setup Channel Summary Channel summary allows you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 191 channels. Regarding digital channels, the only channels that will appear are the ones that are broadcasting. -
Page 42: Channel Label
Initial Setup How to set the channel label. (This is only for analog broadcasting.) Press the M button To CHANNEL SUMMARY π † √® To operate CHANNEL 09 To the ID column π † RESET Press the O button to enter √®... -
Page 43: V-Chip
Initial Setup Channel Guard Message When a viewer attempts to watch a guarded channel, the following message appears: To watch a channel that you have locked, enter the THIS CHANNEL IS LOCKED BY Lock Code using the 10 key pad. CHANNEL GUARD. -
Page 44: Unrated Programs
Initial Setup Unrated Programs Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming” category. Examples of Unrated programs: • Emergency Bulletins •... - Page 45 Initial Setup US V-Chip Ratings U.S. PARENTAL RATING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6.
- Page 46 Initial Setup Setting US V-Chip Ratings Press the M button V-CHIP To V-CHIP V-CHIP π † SET US TV RATINGS √® To operate (lock icon appears) SET MOVIE RATINGS SET CANADIAN RATINGS ENG Press Z to access the V-Chip menu SET CANADIAN RATINGS FRE √®...
- Page 47 Initial Setup Movies Ratings ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MPAA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released.
- Page 48 Initial Setup Canadian V-Chip Ratings ❒ E – Exempt Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. ❒ C – Programming Intended for Children Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.
-
Page 49: Set Lock Code
Initial Setup Set Lock Code Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of “0000”. You may change the code to any four-digit number you wish. To change the lock code, follow the steps below. Press the M button SET LOCK CODE... -
Page 50: Auto Demo
Initial Setup Auto Demo This function lets you preview the Dynamic Gamma demo. Press the M button INITIAL SETUP PREVIOUS To AUTO DEMO π † AUTO TUNER SETUP √® To turn AUTO DEMO ON or OFF CHANNEL SUMMARY V-CHIP SET LOCK CODE Note: AUTO DEMO •... -
Page 51: Closed Caption
Initial Setup Closed Caption Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Your television can access and display this information using the closed caption feature. To activate the closed caption feature, follow the steps below. - Page 52 Initial Setup Digital Manual Setting Press the M button Digital Closed Caption > Appearance Preview To CLOSED CAPTION π † Closed Caption Sample √® To enter Appearance Mode Manual To Type π † Font √® To select Auto, Advanced or Basic Colors To Service π...
-
Page 53: Auto Shut Off
Initial Setup Auto Shut Off This function automatically shuts off your TV when there is no signal from the channel the TV is on. Press the M button INITIAL SETUP PREVIOUS To AUTO SHUT OFF π † LANGUAGE ENG. FRAN. ESP. √®... -
Page 54: Front Panel Lock
Initial Setup Front Panel Lock This allows you to lock the keys on the side of the TV, so that a child may not accidentally change your viewing preferences. Press the M button INITIAL SETUP PREVIOUS To FRONT PANEL LOCK π... -
Page 55: Video Input Label
Initial Setup Video Input Label This function is used to label video input connections for the onscreen displays. Press the M button INITIAL SETUP PREVIOUS To VIDEO INPUT LABEL π † NOISE MUTING √® FRONT PANEL LOCK To enter V1 SMART INPUT To select the desired video input VIDEO INPUT LABEL π... -
Page 56: Position Adjustment
Initial Setup Position Adjustment Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema or full. Press the M button To POSITION ADJUSTMENT π † √® To enter √®... -
Page 57: Video-1 Monitor Out
Initial Setup Video-1 Monitor Out This function allows you to set whether the signal, which comes from VIDEO-1 input terminal, should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to "ON". Press the M button INITIAL SETUP PREVIOUS... -
Page 58: Digital-In
Initial Setup Digital-In The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of HDMI480p picture signals: 640x480 and 720x480. -
Page 59: Center Ch Input
Initial Setup Center CH Input When you are using a surround system, you can substitute the speaker of this television for the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the speaker as the center speaker of your surround system. The volume differs when the TV is being utilized as the Center Channel Input versus when it is not. -
Page 60: Picture Adjust
Picture Adjust Picture Settings These settings allow you to change and adjust the way the picture appears on your television. TINT Tint allows you to adjust the levels of red and green in your TV picture. COLOR The color function lets you make all the colors in the TV picture appear either more vivid or subtle. -
Page 61: Digital Noise Clear
Dynamic Gamma JVC's Dynamic Gamma Circuitry (DGC makes it easier to see dark areas when a picture has many dark areas, and makes it easier to see the bright areas when a picture has many bright areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness... -
Page 62: Smart Picture
Picture Adjust Smart Picture Smart Picture detects the APL (Average Picture Level) and adjusts the contrast suitable for what you are watching. Press the M button SMART PICTURE To SMART PICTURE π † √® To enter To select the mode "ON" or "OFF" π... -
Page 63: Sound Adjust
Sound Adjust Sound Settings These settings allow you to change and adjust the sound on your television. BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with the bass adjustment. TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio. BALANCE –... -
Page 64: Clock/Timers
Clock/Timers Set Clock The set clock function is described on page 31 as the interactive plug-in menu. You can choose to set the clock automatically or manually. If you need to set the clock again, follow the steps below. Press the M button To SET CLOCK π... -
Page 65: On/Off Timer
Clock/Timers On/Off Timer The on/off timer lets you program your television to turn itself on or off. You can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home. -
Page 66: Lamp Reset
Clock/Timers Lamp Timer Reset The lamp replacement message will appear when you need to change the lamp. After you replace the lamp, you need to reset the timer which is built into your television. Press the M button CLOCK / TIMERS PREVIOUS To LAMP TIMER RESET π... -
Page 67: Button Functions
Button Functions Multi Screen Function Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels). Note: After you press any multiscreen buttons, if you press the menu button, only the picture adjust screen will appear. Twin Activate the split-screen option by pressing T the remote control. -
Page 68: Index
Button Functions Index This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch. Notes: • Only RF input signal will be displayed. • You can watch the channel added in channel summary. See page 41. Freeze Pressing the F button causes the screen to change to the split-screen display with the still... -
Page 69: Power
Button Functions Power Turns the TV on or off. Press the P button OWER Note: • After turning the power on, you can not turn the power off for about one minute. Number Buttons - 10Key Pad Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 12: 0 (Zero) 1 (One) -
Page 70: Return+/Tv
Button Functions Return +/TV The R +/TV button has three functions: ETURN Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH–... -
Page 71: Muting
Button Functions Muting The M button instantly turns the volume down completely when you press it. Press UTING and the volume level will instantly go to zero. To restore the volume to its previous UTING level, press M again. UTING Video Status The V button gives you a choice of four TV picture display settings, including a... -
Page 72: Sleep Timer
Button Functions Sleep Timer The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15 minutes, for a total time of up to 180 minutes. Press the S button LEEP 0 15 30 45 60 75 90 105 120 135 150 165 180 Sleep Timer Message... -
Page 73: Display
Button Functions Display The display screen shows the current status of timers, inputs and XDS ID. Press the D button ISPLAY The screen to the right shows the following information: 05 KLVX PBS JAZZ FESTIVAL • The current channel or AV input (Channel 05) 12:20 PM •... -
Page 74: Favorite
Button Functions Favorite The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See how to register below. Press the F button AVORITE FAVORITE The favorite channel list will appear. PREVIOUS To select the channel you want to watch π... -
Page 75: Aspect
Button Functions Aspect This feature will help you adjust the picture you are watching to give you the best possible picture quality. Aspect Ratios PANORAMA - With this ratio a normal REGULAR - The regular ratio is used 4:3 aspect picture is stretched to fit the when you want to watch a 4:3 broadcast dimensions of the 16:9 aspect screen. -
Page 76: Menu
FULL automatically, the televison will change to the aspect mode you choosed. Menu The M button allows you to access JVC’s onscreen menu system. Press M to activate the onscreen menu system. • See individual topics like “Sound Adjust” for specific information on using menus. -
Page 77: Tv/Catv Slide Switch
VCR, please see the code chart and instructions on page 34. • The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand DVD player, please see the code chart and instructions on page 35. -
Page 78: Digital Setup
Digital Setup Digital Setup Use this function when you are receiving a digital broadcast. Press the M button Digital Setup To DIGITAL SETUP π † Antenna Level √® To enter Digital Sound Aspect Ratio The onscreen will appear Cable Card Application Notes: i.LINK Auto Play Software Update... -
Page 79: Digital Sound
Digital Setup Digital Sound You can select the optical digital sound output, either PCM or Dolby Digital when your TV is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can enjoy listening in 5.1ch sound when watching digital broadcasts. Press the M button To DIGITAL SETUP... -
Page 80: Cable Card Application
Digital Setup Cable Card Application Press the M button To DIGITAL SETUP π † √® To enter To Cable Card Application π † √® To enter Press the O button The application will perform i.LINK Auto Play When playing a D-VHS tape, you can set it to the i.LINK input automatically, or manually. Press the M button To DIGITAL SETUP... -
Page 81: Digital Button Functions
Digital Button Functions Digital CH D/A (Digital/Analog) The D/A button changes the analog and digital channel. Each time you press the D/A button, you can switch back and forth the analog and digital channels. Digital channels have a "D" in front of the channel number. -
Page 82: I.link Menu
Digital Button Functions i.LINK Menu i.LINK has two menus - Controller and Device. By connecting a D-VHS VCR with an i.LINK cable, you can set the timer easily. Notes: • The i.LINK/Timer function will only work when you are receiving digital programming only. •... -
Page 83: Device
Digital Button Functions Device To operate, select a device. i.LINK Controller Renumber Device Page 2/3 D-VHS1 HM-DH30000U D-VHS2 HM-DH40000U HD-MOVIE 1 GR-HD1 To select your device connecting with i.LINK π † Press the OK button Notes: • If you do not select the device, you cannot use the i.LINK timer functions. •... -
Page 84: Timer
Digital Button Functions Timer You can set the two timers: Record and view. The timer starts the recording or turns to the channel you set for it automatically. Reservation Press the T button IMER To New Reservation π † Press the O button New Reservation Timer... -
Page 85: Timer Edit
Digital Button Functions Timer Edit When you want to confirm the timer you set or edited, or delete the timer setting, use this function. Timer Edition Press the T button IMER To select the timer list you want to edit π... -
Page 86: Guide
Digital Button Functions Cancel the timer recording When you record a digital program now, you can cancel the recording. Press the T button IMER Timer Sep. 10 (Wed) 4:55PM To select the timer list you want to cancel π † Page 1/1 the recording New Reservation... -
Page 87: Osd Information
OSD Information Weak Signal This OSD warning appears when the digital channel that you have selected is too weak to receive or no signal is being detected for that channel. Weak Signal No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. -
Page 88: Cable Card Information
Cable Card Information Cable card offers information when a cable card is inserted into the CABLE CARD slot on the back of the TV. Notes: • Please contact your local cable company regarding detailed information. Cable Card Connection ATSC /DIGITAL CABLE IN CABLE CARD TV Rear Panel Note for inserting Cable Card:... -
Page 89: Appendices
Troubleshooting PROBLEMS CHECK There is no power • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a power outage. • It is possible the fan is stuck or the inside temperature is rising abnormally. Consult your dealer. - Page 90 Troubleshooting PROBLEMS CHECK There is no sound • The Center CH Input may be turned on. See page 59. from the TV's • The TV Speaker option may be turned off. See page 57. speaker Static electricity • It is normal to feel static electricity if you brush or touch the screen. You hear occasional •...
-
Page 91: Changing The Lamp
Appendix Changing the Lamp WARNING! It is very important that you NEVER TOUCH THE GLASS SURFACE OF THE NEW LAMP. Touching the glass surface will deposit oils from your hand onto the lamp surface. When the lamp heats up to its operating temperature, the oil will cause a difference in temperature on the lamp surface that will likely cause the lamp to break. -
Page 92: Replacement Lamp Kit
Before replacing the lamp, you will need to purchase a replacement kit, part number TS-CL110U. To purchase this kit, consult your dealer or call 1-800-252-5722, or go to www.jvc.com. The replacement kit will include the following: 1 High-Pressure Mercury Lamp... -
Page 93: How To Replace The Lamp
Appendix How to Replace the Lamp Please read these instructions fully before attempting to replace the lamp. If you feel unsure about replacing the lamp yourself, call a service technician. Please observe all safety warnings. 1) Turn off the television. Press the POWER button on the remote control or TV front panel. - Page 94 Appendix 5) Install the new lamp unit. Holding the handle attached to the new lamp unit, slide and push the new lamp straight into the television and back into the lamp housing area. Do not forget to re-tighten the two screws. Note: If the lamp does not sit securely in the TV (flat in the lamp housing area), it won’t turn on.
-
Page 95: Warning Led Messages
Appendix Warning LED Messages While the power is on, and there is a problem with the TV, the TV changes to warning mode and informs you of the problem using the LED as follows. Then, the power turns off automatically and performs the cooling for approximately 90 seconds. The LAMP/PROGRAM LED blinks Condition: It may be a malfunction of the internal electrical circuits. -
Page 98: Specifications
Illuminated remote control unit x 1 / AA batteries X 2 Two-way Splitter x 1 / RF Cable x 2 Specifications subject to change without notice. • The open source software is embedded in this product. For more information, please go to: http://software.jvc.com/opensource/lnx/DP/04_AtscCC/download.html... -
Page 99: Notes
Notes... - Page 100 Notes...
- Page 101 Notes...
- Page 102 Notes...
- Page 103 Notes...
- Page 104 JVC COMPANY OF AMERICA JVC CANADA, INC. Division of JVC Americas Corp. 21 Finchdene Square 1700 Valley Road Scarborough, Ontario Wayne, New Jersey, 07470 Canada, M1X 1A7...