Getting Started; Installing And Removing The Main Battery; Installing The Main Battery - Motorola WT4070 User Manual

Getting Started

In order to start using the wearable terminal for the first time:
•
Install the main battery
•
Charge the main battery and backup battery
•
Install the wearable terminal onto the wrist mount
•
Install an optional scanner
•
Start the wearable terminal.
The main battery can be charged before or after installation into the wearable terminal. Use the
NOTE
Single Slot USB cradle or Four Slot Spare Battery Charger to charge the main battery before
installation, or the Single Slot USB cradle or Four Slot Ethernet cradle to charge the main battery
after installation.

Installing and Removing the Main Battery

Installing the Main Battery

Before using the wearable terminal, install a lithium-ion (Li-ion) battery by placing the battery into the wearable
terminal as shown in
NOTE Ensure the battery is fully inserted. An audible click can be heard as the battery is fully inserted. A partially
inserted battery may result in unintentional data loss.
When a battery is installed in a wearable terminal for the first time the wearable terminal boots and powers on
automatically.
Installing the Main Battery
Figure 1-7
Figure 1-7.
Getting Started 1 - 7