To Install A Memory Module - Sony VAIO PCG-R505TE Service Manual

VAIO® R505 SuperSlim Pro™ Notebook User Guide
❑
Electrostatic discharge (ESD) can damage disk drives and other components.
Perform the procedures described below only at an ESD workstation. If such
a station is not available, do not work in a carpeted area, and do not handle
materials that produce or hold static electricity (cellophane wrappers, for
example). Ground yourself by maintaining contact with an unpainted metal
portion of the chassis while performing the procedure.
❑
Do not open the memory module package until you are ready to install the
module. The package protects the module from ESD.
❑
Use the special bag for preventing ESD or use aluminum foil when you store
the memory module.

To Install a Memory Module

1 Shut down your computer and disconnect all peripheral devices, such as
your printer.
2 Unplug the computer and remove the battery packs.
3 Wait until the computer cools down. Then unscrew the two screws with the
mark on the bottom of your computer.
Screws on Bottom of Computer
34