Controlling Indoor Units - Samsung S-NET mini MST-S3W User Manual

Indoor Unit Control (Continued)

Controlling Indoor Units

- GHP, EHP, AHU, Global 4Way, Fresh Duct, ERV+, MINI AHU
!
Tap [Indoor unit control] on the Main menu.
28
1
Select a zone from the Zone name list.
 All the indoor units under selected zone will be
displayed on Indoor unit display window.
2
Select one or more indoor unit to be controlled from the
indoor unit display window.
 Zone name and the indoor unit name will be displayed
on the Selected indoor unit display.
 Current status of last selected indoor unit will be
displayed on the Indoor unit control window.
 Tap the indoor unit again to deselect.
Note  When Basic operation (Auto/Cool/Heat/Fan/Dry) and
advanced function (good'sleep/Timer) is selected,
desired temperature on the remote control and the
S-NET mini can be different. Advanced function will be
displayed as 'Auto' on your S-NET mini.
All the advanced function will be canceled when you
control the air conditioner with S-NET mini.
 Each indoor unit should be turned on since detailed
control is not possible when it is off. However, remote
controlling, setting upper/lower temperature limit, filter
reset and operate mode limits setup are allowed even if
the indoor unit is off.