Troubleshooting
Problem
DMS is not connected. Is the DMS turned on?
108
Check
Have you set DMS as your
communication device?
Did you correctly set the IP for
S-NET mini and the DMS?
Is the LAN connected to the
DMS correctly?
Doesn't the DMS have any
defect?
Did you set the correct IP for
S-NET mini and the DMS?
Is your network status normal?
Explanation/Solution
DMS always has to be turned on.
Check the DMS is turned on, and
connect the DMS again.
Refer to [System Management]
[Communication setup] and
make sure you have set correct
communication device.
Refer to [H/W setup] [IP setup]
and check the IP for S-NET mini.
Refer to [System Management]
[DMS IP setup & Update data] and
check the IP for DMS.
Check the LAN is connected to the
DMS correctly. It is impossible to
connect the DMS to S-NET mini
without LAN. Consult a person in
charge of network for further
information.
Check the status of the DMS.
Refer to [H/W setup] [IP Setup] to
check the S-NET mini IP. (Make sure
IP is correct and not repeated.)
Refer to [System Management]
[DMS IP Setup] to check the DMS IP
(Make sure IP is correct and not
repeated).
Check if your network status is
normal. Consult a person in charge
of network for further information.