Emptying The Machine; Before The Daily Shutdown; Maintenance - Hobart CLF 26 Installation & Operation Manual

Follow the instructions given for the first wash cycle from point 6 "Load the items to be washed
into the racks" onwards.
5.

Emptying the machine

I Appliances without drain pumps
Switch off the machine at the power on/off switch [1].
Remove the overflow plug from the machine and wait until the chamber is completely
empty before proceeding to clean as described in the section "Maintenance".
II Appliances with drain pumps
To drain the machine:
I. Clean the filters.
II. Remove the overflow plug.
III.Press the "drain pump" button [6] to drain, releasing it when the chamber is empty.
6.

Before the daily shutdown

• Remove the overflow plug and empty the machine as described in the section "Emptying the
machine".
• Clean the machine as described in the section "Maintenance".
• Switch the machine off at the power on/off switch [1]
•
Disconnect the power supply to the machine at the external main switch.
•
Turn off the external water stop cock.
• Leave the door slightly ajar to prevent unpleasant odors forming in the chamber.
7.

Maintenance

I Daily maintenance
The following operations are to be carried out two or three times a day when residue
accumulates around the chamber filter.
• Drain the water off completely as described in the section "Emptying the machine".
•
Disconnect the power supply at the external main switch.
•
Turn off the external water stop cock.
• Remove the racks, filters and overflow plug from the chamber.
USE AND MAINTENANCE
For appliances without detergent dispensers only.
If five cycles have already been performed, add detergent in the
region of the washing pump suction filter in the amount indicated
by the detergent manufacturer and the installation manual.
Page 15
CLF 26