Setting The Compressor - Roland Quad-Capture Owner's Manual

Setting from the Control Panel

Setting the Compressor

Screen Indication
30
Setting Description
Gate Mutes signals below a specified level (in dB).
When set to off, the compressor is enabled. When set to on, the
Bypass
compressor is disabled.
Specifies the signal level (in dB) at which the compressor begins
Threshold
operating.
Specifies the compression ratio by which the audio signal is to be
Ratio
compressed.
Attack Specifies the time (in msec) from when the input level exceeds the
Time threshold level until the compressor begins to operate.
Release Specifies the time (in msec) from when the input level falls below the
Time threshold level until the compressor stops operating.
Gain Adjusts the output level (in dB) of the compressor.
Stereo When you set this function to on, the compressor setting of the
Link INPUT 2R jack will follow that of the INPUT 1L jack.