General; Time; Sound - Blaupunkt Philadelphia 835 Operating Instructions Manual

Parking volume – Adjust the volume of the active audio
source while parking.
DivX registration code – Display of the DivX® registra-
tion code

General

The following settings are possible:
Radio region – Select the reception region for the radio
reception.
Background light off – If this value is set, the display of
the radio is completely switched off after 10 or 20 sec.
without use.
Dimmer mode – Adjust the display brightness
VarioColour – Adjust the illumination colour of the but-
tons.
Beep – Switch confi rmation beep on/off
Wallpaper – Select the wallpaper for menus. Various mo-
tifs can be selected in the device. You can also select your
own images which you previously stored on the MicroSD
card.
Calibration – The touchscreen can be calibrated here.
Theft protection – Activate/deactivate the code query.
If the code query is activated, the four-digit code num-
ber must be re-entered every time the device is discon-
nected from the vehicle system voltage (e.g. removal of
the battery for repairs).
Security code – You can change the code number. To
change the code number, enter the four-digit code num-
ber. The code number is set to 0000 at the factory.
Load factory – Resets all personalised settings. With the
exception of the personally selected security code.

Time

The following settings are possible:
Date – Set the date
Clock mode – Selection between 12 and 24-h mode
Time – Set the time

Sound

The following settings are possible:
Subwoofer – Switch subwoofer on/off
Subwoofer fi lter – Make the setting according to the
subwoofer used (settings: 80/120/160 Hz).
Dynamic bass boost – Switch dynamic bass on/off
Basic settings
21