Rear Seat Entertainment (Rse); External Audio/Video Sources - Blaupunkt Philadelphia 835 Operating Instructions Manual

Auto answer – If "Auto Answer" is activated, incom-
ing phone calls are automatically answered.
Pairing code – Many Bluetooth® devices request the
pairing code before establishing the connection. You
can defi ne it here.
Phone book sync – To be able to access the phone
book of a connected telephone, you must fi rst syn-
chronise it via this menu entry.
Auto sync – If "Auto sync" is activated, the synchro-
nisation of the phone book is performed automati-
cally as soon as the telephone is connected with the
device.

Rear Seat Entertainment (RSE)

The Philadelphia 835 features outputs to connect two
external monitors and audio outputs for the rear area of
the vehicle.
Since a diff erent programme can be displayed on the ex-
ternal monitors than on the device, it is possible to view
images and movies on an external monitor while driving.
The audio playback for the RSE is established via the
sockets Rear Out R and Rear Out L. These sockets should
be connected with suitable jack sockets so that the pas-
sengers in the front can listen to their audio programme
via headphones.
Starting RSE via external monitors:
u Select the desired source via the main menu and
start the fi lm playback, e.g. from a DVD.
The fi lm is displayed on the monitor of the
Philadelphia 835 unit.
u Call up the main menu.
u Press the [
] button.
The RSE main menu is displayed.
u Select the same source in the RSE main menu as pre-
viously done in the main menu.
The fi lm is now also displayed on the external moni-
tors.
u Press the [
] button to change back to the main
menu.
Bluetooth mode | Rear Seat Entertainment | External audio/video sources
Note:
If you select diff erent source for the built-in monitor,
the fi lm playback continues to be displayed on the
external monitors.
u To deactivate the RSE, change to the RSE main menu
and press the Rear off button.

External audio/video sources

This device features two external AV inputs for audio and
video playback:
• AV-IN 1 is located under the cover at the front of the
device.
• AV-IN 2 is implemented as a cinch socket on a cable
at the rear of the device. You can specify the instal-
lation location of the port during the installation of
the device.
tor in the front AV-IN socket may cause injuries. The use
of straight plugs or adapters leads to an increased risk
of injury.
u Start the AV-IN mode AV-IN 1 or AV-IN 2 via the main
menu or with the SRC button
The display shows the audio or video playback of the
selected AV source.
Danger!
Increased risk of injury from connector.
In case of an accident, the protruding connec-
4
.
19