Wall Thermostat; Remote Control; Convection Fan - Lopi 31 DVI Manual

Gas fireplace inserts
Table of Contents

Advertisement

Finish Options
Choose from Logset or Stones
Easily transform the overall look and appearance allowing the insert to fit a wide range of architectural styles.
The Stone kit and Driftwood Fire Art™ comes with tumbled glass media floor in three colors platinum, bronze or cobalt blue.
The Traditional log set comes with glowing embers and beautifully detailed logs.
Stone Kit with Glass Media
Add A Fireback
As An Option
Both DVI inserts ship with
a painted black interior or
you have the option of add-
ing a realistic ceramic brick
fireback that looks like real
masonry brick. For a more
contemporary look, add the
stainless steel liner or glossy
black enamel firebacks to
add a new dimension of
depth to your insert.

Remote Control

Adding a remote provides for
the ultimate in easy operation of
your fireplace insert. The remote
offers ON/OFF and thermostat
setting. This remote control also of-
fers a clock, fireplace timer to turn
off your insert and a childproof
lockout.

Convection Fan

This 180 CFM fan enhances and speeds up the
natural heat transfer around the insert and
directs it back into your home. The fan must be
installed at the same time of installation to avoid
additional installation cost later
Insert Wiring Kit
If you do not want to run a power cord across
your hearth when using the optional fan or
remote, use optional wiring kit to hard-wire
your AC power from inside the fireplace
Driftwood with Glass Media
Common Straight Brick
Stainless Steel

Wall Thermostat

The wall thermostat provides the ability to set
the desired temperature that you would like for
the room. The fireplace will cycle on and off to
maintain your set temperature. It can be wired
up to 25 feet away from the appliance and allows
for easy hands-free convenience.
Finish Panels
To complete the picture after the insert is
installed in your fireplace, a set of panels
are attached to the insert to accommodate
the size variance between the insert face and
the size of your existing fireplace opening.
31 DVI - 3 Piece Panels
.
4" x 6" Panels = 37 1/8" W x 25" H
8" x 10" Panels = 40 3/8" W x 28 7/8" H
10" x 13" Panels = 44 3/8" W x 31 7/8" H
31 DVI - One Piece Panels
38" W x 25" H
.
40" W x 28 1/2" H
Traditional Log Set
Herringbone Brick
Black Enamel
33 DVI - 3 Piece Panels
4" x 6" Panels = 40" W x 29" H
8" x 10" Panels = 44 3/16" W x 33 3/8" H
10" x 13" Panels = 48 3/16" W x 36 3/8" H
33 DVI - One Piece Panels
42" W x 30 1/2" H
44" W x 34"
Handmade Brick

Advertisement

Table of Contents
loading

This manual is also suitable for:

33 dvi

Table of Contents