After Changing The Jets - Miele KM 2256 Operating And Installation Instructions

After changing the jets

^ Assemble the removed burner parts
in the reverse order.
^ Check for leaks by operating the
burner without the upper part of the
cooktop in place (use a match to
ignite the flame).
^ Remove the loose burner parts again.
^ Replace the upper part of the
cooktop.
^ Screw the burner bases into place,
and replace the other parts of the
burner. Take care to reassemble the
different parts in the correct order.
^ Replace the controls.
^ Finally ignite all the burners to check
that they are operating correctly.
Conversion to another type of gas
The flame must not go out on the lowest
setting, or when the control is turned
quickly from a high to a low setting.
On the highest setting, the flame must
have a distinctive and visible core.
Adhere the label supplied with the jets
above the label stating the type of gas
being used.
57