Removal Of Flame Rod And Spark Plug; Removal Of Outgoing Water Thermistor; Removal Of Heat Exchanger Thermistor; Removal Of Air Intake Thermistor - Rinnai INFINITY 26i Service Manual
Infinity high capacity continuous flow gas hot water system
Hide thumbs
Also See for INFINITY 26i:
- Service manual (63 pages) ,
- Installation and user manual (40 pages) ,
- Operation & installation manual (40 pages)
Table of Contents
Advertisement
Gas Control
9)
Removal of Flame rod and spark plug
a. Remove flame rod terminal and tighten span cord.
b. Remove flame rod and spark plug.
c. Remove of High Tension lead
Infinity REU-V2632FFU / HD200I REU-V2632FFUC
Infinity 26i and HD50i
10) Removal of outgoing water thermistor
a. Remove thermistor fixing screw.
b. Remove 2 pin connection outgoing water thermistor
Heat Exchanger Thermistor
11) Removal of heat exchanger thermistor
a. Remove thermistor holder
b. Remove 2 pin connector
12) Removal of air intake thermistor
a. Remove fan motor
b. Remove 2 pin connector of inlet thermistor
c. Remove inlet thermistor (care with O-ring)
d. Thermistor
- 45 -
Issue 1 - 8/09/03 ©Rinnai
Hide quick links:
Advertisement
Chapters
Table of Contents
