If Your Console Cannot Find The Acoustimass ® Module - Bose CineMate 520 Owner's Manual

Care and Maintenance
Problem What to do
Poor or • Remove all protective films from the system.
distorted
• Secure all cable connections on the speakers, TV, and connected sources.
sound
• If you see the error message Cannot find Acoustimass:
- Plug in the Acoustimass
- Pair the Acoustimass module with the console (see "If your console
• If using the analog or
• Factory reset the system (see page 31) and run the ADAPTiQ
calibration (see page 19).
Intermittent • Secure all cable connections on the speakers, TV, and connected sources.
sound
• Move system away from potential interference, such as a wireless router,
cordless phone, television, microwave, etc.
If your console cannot find the Acoustimass
The Acoustimass module and console are paired at the factory. However, if you
see the error message Cannot find Acoustimass on the display, perform this
pairing procedure:
1. Unplug the Acoustimass module.
2. Press on the remote control.
3. until 15 PAIR ACOUSTIMASS appears on the display.
Press
4.
Press .
Plug in Acoustimass appears on the display.
5.
Plug the AC power cord into an AC (mains) outlet.
After the Acoustimass module connects to the console, Pairing complete
appears on the display.
30 - English
cannot find the Acoustimass
module.
®
module").
®
connector, decrease the volume on your source.
audio
®
module
®