Heatilator HEIR36H Owner's Manual page 56

Log #5 (2284-705): Locate fl at areas on Log #1 and Log #3 that will be used to position Log #5. See Figure 11. Place
Log #5 into appliance as shown in Figure 12. Log #5 should contact base refractory and rest on the fl at areas as shown in
Figure 11. Burned portion of Log #5 should be in front of Log #1. Log should be about 1/2 inch from front outer edge of base
refractory when properly positioned. See Figure 12.
BURNED BURNED
PORTION PORTION
6 6
EDGE OF LOG USED EDGE OF LOG USED
FOR POSITIONING FOR POSITIONING
Figure 10.
Log #6 (2284-706): Locate fl at areas on Log #2 and Log #3 that will be used to position Log #6. See Figure 11. Place Log
#6 into appliance as shown in Figure 13. Edge of Log #6, highlighted in Figure 10, will be about 1/2 inch from the center grate
tine on both HEIR36 and HEIR42. Right side of log contacts right grate tine.
4 4
1 1
2 2
3 3
Figure 12. Log #5 Placement
56
5 5
BURNED BURNED
PORTION PORTION
5 5
1/2 INCH 1/2 INCH
Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev. F • 11/12
FOR LOG #5 FOR LOG #5
FOR FOR
LOG #5 LOG #5
2 2
FOR LOG #6 FOR LOG #6
Figure 11.
2 2
1/2 INCH 1/2 INCH
HEIR42 SHOWN HEIR42 SHOWN
Figure 13. Log #6 Placement
4 4
2 2
Figure 14. Log Set Installed.
1 1
3 3
LOG DOES NOT LOG DOES NOT
CONTACT GRATE CONTACT GRATE
TINE TINE
1 1
6 6
5 5
3 3
2284-935C