Taking Photos - Canon DC310 Instruction Manual

Photos
Refer to this chapter for details on shooting photos - from capturing
and playing back images to printing them.
Taking Photos
Before using a memory card for the
first time, be sure to initialize it with
this camcorder (CD 59).
(CD 21)
1
Move the ."10 switch to 0 (still
images).
2
Turn the
lit.lflJ::t3
switch to ON to set
the camcorder in CAMERA mode.
The red CAMERA indicator will turn
on.
3
Move the lens cover switch down
to
C
to open the lens cover.
4
Press
[Start/Stop ].
• Once the focus is automatically
adjusted, 0 will turn green and one
or more AF frames will appear.
• The CARD access indicator will
flash as the still image is being
recorded.
o
IMPORTANT
Observe the following precautions while
the card access display
(~
Od)
appears on
screen, and when the CARD access
indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot cover
and do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the .~ /0
switch or the operating mode.
(1)
NOTES
Ifthe subject is not suitable for autofocus,
o
turns yellow. Adjust the focus manually
(CD 41).
Photos • 51