Canon DC310 Instruction Manual page 30

• Observe the following precautions while
the DISC access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the disc cover and do not
remove the disc.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the operating mode.
CD
NOTES
• About the recording time: By changing the
recording mode you can change the
recording time available on the disc
((IJ 31).
• About the Power Save mode:
To save power
when the camcorder is powered by a
battery pack, the camcorder will
automatically shut off if left without any
operations for 5 minutes ((IJ 68). To
restore the power, turn the
~
switch
toward MODE and release it, or turn the
Iim'IiD
switch to . . and back to ON
again.
• When recording in very loud places (such
as fireworks shows or concerts), sound
may become distorted or it may not be
recorded at the actual levels. This is not
a malfunction.
30 • Video